1. TechSpot is dedicated to computer enthusiasts and power users. Ask a question and give support. Join the community here.
    TechSpot is dedicated to computer enthusiasts and power users.
    Ask a question and give support.
    Join the community here, it only takes a minute.
    Dismiss Notice

"out of range" on monitor

By Zolga ยท 8 replies
May 13, 2007
  1. When my computer boots it puts "out of range" on my monitor but when the OS starts it goes away and windows starts normally.
    i can't get into the BIOS menu or anything because its just a black screen.
    My OS boots properly...

    Any ideas?
     
  2. CCT

    CCT TS Evangelist Posts: 2,653   +6

  3. Zolga

    Zolga TS Rookie Topic Starter Posts: 56

    MInes totally different

    gg.
     
  4. CCT

    CCT TS Evangelist Posts: 2,653   +6

  5. Zolga

    Zolga TS Rookie Topic Starter Posts: 56

    Read my problem again =//
    Its not within the OS.
     
  6. CCT

    CCT TS Evangelist Posts: 2,653   +6

    OK - so you have what? An LCD, CRT, pool of electrified water?

    Can you try an alternate monitor in other words.
     
  7. Zolga

    Zolga TS Rookie Topic Starter Posts: 56

    Im using a TFT monitor, i tried using a normal monitor and it works fine.
     
  8. CCT

    CCT TS Evangelist Posts: 2,653   +6

    Have you tried pressing the key needed to enter bios anyway just to see?

    On my Asus with DVI to an LCD, I get 'no signal' and then 'input not supported' until near the end of the bios post BUT if I press 'del' right off the bat after pressing the power button I will get into bios.
     
  9. Zolga

    Zolga TS Rookie Topic Starter Posts: 56

    i have tried that and it's the same, It says "No signal input" then goes black screen, untill it loads the OS then works fine.
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...