Plague of Bugchecks

Status
Not open for further replies.

phonb

Posts: 45   +0
I suspect its my faulty RAM causing many reboots, but I wanted to get your opinions on it. I have attached 4 of my most recent minidumps for your review.
 
Inside the 4 MiniDumps:

BugCheck 1000008E, {c0000005, bfa8e8e4, bacffb6c, 0}
Probably caused by : nv4_disp.dll

BugCheck 1000008E, {c0000005, bfa8e8e4, b2dfdc10, 0}
Probably caused by : nv4_disp.dll

BugCheck 1000008E, {c0000005, bfaa0771, ba10b920, 0}
*** WARNING: Unable to verify timestamp for nv4_mini.sys
*** ERROR: Module load completed but symbols could not be loaded for nv4_mini.sys
Probably caused by : nv4_disp.dll

BugCheck 1000008E, {c0000005, bfa8e8e4, 87725c10, 0}
Probably caused by : nv4_disp.dll

Please update your nVidia Video card drivers
 
Thx kim, heres an update:

Downloaded most recent nvidia drivers. though problem still persists. also now have had instances during gaming were computer would freeze and not respond (though mouse cursor still moves). In these occasions I've had no choice but to power off.

Here are my most current minidumps...
 
Inside the 4 MiniDumps:

BugCheck 1000008E, {c0000005, bfa8d9c5, 9a636b2c, 0}
Probably caused by : nv4_disp.dll

BugCheck 1000008E, {c0000005, bfa8e8e4, ba253b94, 0}
Probably caused by : nv4_disp.dll

BugCheck 1000008E, {c0000005, bf9c700e, a5486c6c, 0}
Probably caused by : dxg.sys

BugCheck 100000D1, {18, 2, 8, 18}
*** WARNING: Unable to verify timestamp for nv4_mini.sys
*** ERROR: Module load completed but symbols could not be loaded for nv4_mini.sys
Probably caused by : nv4_mini.sys

You need to download (or re-download DirectX updates and install them)

By the way, are you using any external joysticks or anything like that?
And are you using the onboard sound or do you have a PCI sound card plugged in.
The reason why I ask is because I'm concerned about IRQ conflicts (basically how and where Windows has set up your hardware.
If you have any internal hardware not required (other PCI cards so forth) please remove them (I was going to say disable, but prefer remove)
 
Status
Not open for further replies.
Back