TechSpot

Popups and such: HJT log inside

By wildgoose
Oct 11, 2006
  1. New member here with a problem. Log is attached.

    Would also like to thank those running this service.
     
  2. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Hello and welcome to Techspot.

    Download the Pocket Killbox programme from HERE. Extract it but don`t run it yet.

    You might want to copy and paste these instructions into a notepad file. Then you can have the file open in safe mode, so you can follow the instructions easier.

    Turn off system restore.(XP/ME only) See how here.> http://www.bleepingcomputer.com/forums/tutorial56.html

    Boot into safe mode, under your normal user name(NOT THE ADMINISTRATOR ACCOUNT). See how here.> http://www.bleepingcomputer.com/forums/tutorial61.html

    In Windows Explorer, turn on "Show all files and folders, including hidden and system". See how here.> http://www.bleepingcomputer.com/forums/tutorial62.html

    Go to add remove programmes in your control panel and uninstall anything to do with(if there).

    Viewpoint
    Viewpoint Manager

    Close control panel.

    Open your task manager, by holding down the ctrl and alt keys and pressing the delete key.

    Click on the processes tab and end process for(if there).

    ViewMgr.exe
    next06.exe

    Close task manager.

    Run HJT with no other programmes open(except notepad). Click the scan button. Have HJT fix the following, by placing a tick in the little box next to(if there).

    R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =

    O2 - BHO: (no name) - {8980F81A-C6A0-4C05-8303-7CB722F6969A} - C:\WINDOWS\system32\gebcb.dll

    O4 - HKLM\..\Run: [ViewMgr] C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe

    O4 - HKLM\..\Run: [mmnext06] C:\WINDOWS\next06.exe

    O20 - Winlogon Notify: gebcb - C:\WINDOWS\system32\gebcb.dll

    Click on the fix checked button.

    Close HJT.

    Locate and delete the following bold files and/or directories(if there).

    C:\Program Files\Viewpoint Delete the entire folder.

    C:\WINDOWS\next06.exe

    Run the killbox.exe file. When it loads type the full path to the file you would like to delete in the field and check the delete file on reboot button. press the Delete File button (looks like a red circle with a white X). It will prompt you to reboot, select no until you have finished inputting the files you want to delete, only then allow it to reboot and hopefully your files will now be deleted.

    This is the filepath you need to enter into killbox.

    C:\WINDOWS\system32\gebcb.dll

    Once your system has rebooted, turn system restore back on and rehide your protected OS files.

    Post a fresh HJT log and let me know how your system is running.

    Regards Howard :wave: :wave:

    This thread is for the use of wildgoose only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  3. wildgoose

    wildgoose TS Rookie Topic Starter

    Thank you for the quick reply. I have the new HJT log file posted. One problem I went into when performing what you instructed was that HJT wasn't able to clean:

    O2 - BHO: (no name) - {BFC6AEE5-5216-49E7-9AD0-34BE28B3589D} - C:\WINDOWS\system32\gebcb.dll
    O20 - Winlogon Notify: gebcb - C:\WINDOWS\system32\gebcb.dll
     
  4. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    That`s why I asked you to use the Pocket Killbox programme.

    Read the instructions I gave you again.

    Regards Howard :)

    This thread is for the use of wildgoose only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  5. wildgoose

    wildgoose TS Rookie Topic Starter

    I forgot to mention, I did use pocket killbox. It did not reboot the machine after it said it removed the file. It only had a message box come up saying the file was removed.
     
  6. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Ok, please post a fresh HJT log.

    Regards Howard :)

    This thread is for the use of wildgoose only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  7. wildgoose

    wildgoose TS Rookie Topic Starter

    This is the new HJT log.
     
  8. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Download a fresh copy of Vundo fix from HERE.

    Double-click VundoFix.exe to run it.

    Rightclick in the main window and click add more files.

    Enter the filepath you wish to remove into the top line and click the add files button, followed by the close window button.

    This is the filepath you need to enter.

    C:\WINDOWS\system32\gebcb.dll

    Click the remove vundo button. And let vundofix do it`s stuff.

    Run HJT with no other programmes open. Click the scan button. Have HJT fix the following, by placing a tick in the little box next to(if there).

    R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = https://portal.hsc.stonybrook.edu/

    O2 - BHO: (no name) - {36244C43-97B3-4AEB-A0C3-29A3A35141F5} - C:\WINDOWS\system32\gebcb.dll

    O20 - Winlogon Notify: gebcb - C:\WINDOWS\system32\gebcb.dll

    Reboot your computer and post a fresh HJT log.

    Regards Howard :)

    This thread is for the use of wildgoose only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  9. wildgoose

    wildgoose TS Rookie Topic Starter

    I think it worked. This is the latest HJT.
     
  10. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Well done, your HJT log is now clean.

    If you have any further virus/spyware problems, please post in this thread.

    Regards Howard :)

    This thread is for the use of wildgoose only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...