Bsod Problem

Hello,

When Im on my pc it randomly gets a bsod 0x000000D1 IRQL_NOT_LESS_OR_EQUAL. It happens sometimes after hibernation. When i sent the report they said it was caused by a faulty device driver. Help Appreciated!

Read this thread carefully and follow the instructions: http://www.techspot.com/vb/topic51365.html

Heres my minidumps

I also get Page_found_in_nonpaged_area 0x8e and 0x24. Sometimes it says ntfs.sys causes it.

Most likely cause - SSFS0509.SYS. Part of Alcohol or it's ilk?

Part of Alchohol or ilk? What do you mean? Sorry. I did find the SSFS0509.SYS driver though. I found that SSFS0509.SYS is related to spysweeper somehow on my pc.

I just got another BSOD saying something was wrong with Partmgr.sys.

Anyone here?

The main error code is listed below, the files referenced are Trend Micro, Spysweeper and bcmw15.sys (Linksys driver?). Run chkdsk /r first to see if there's a problem with the HDD.

0x00000024: NTFS_FILE_SYSTEM
A problem occurred within NTFS.SYS, the driver file that allows the system to read and write to NTFS file system drives. There may be a physical problem with the disk, or an Interrupt Request Packet (IRP) may be corrupted. Other common causes include heavy hard drive fragmentation, heavy file I/O, problems with some types of drive-mirroring software, or some antivirus software. I suggest running ChkDsk or ScanDisk as a first step; then disable all file system filters such as virus scanners, firewall software, or backup utilities. Check the file properties of NTFS.SYS to ensure it matches the current OS or SP version. Update all disk, tape backup, CD-ROM, or removable device drivers to the most current versions.

I just did a check on drive c. No errors. I have a linksys router but its not connected to this laptop. It's connected to a desktop in another room. So I don't know what to do with that driver you mentioned. Also, I've never had many troubles with Trend Micro or Spy Sweeper. Do you think I should uninstall them? I'm not sure where to go from here after checking my drive.

I havent gotten a BSOD in three days without the laptop battery in and plugged in. Then when I used it with battery in and off charger dock it bsods almost right after it entered windows. This is really strange. Here's a more current minidump.

*edit* I just got a bsod while plugged in! Darnit! I'm really confused and I can't figure out how to fix this.

Same error as post #9 with Trend Micro as the process. The system file is up to date, so try reinstalling Trend Micro.

I just uninstalled trend micro. Then when I thought everything was ok, I tried running laptop on battery and got more bsods. Some of them were during the windows xp loading screen too.

Here's an up to date minidump.

Was this with the battery? Lack of power can cause the problems you're having.

PartMgr.sys was the cause, but it also references atapi and Classpnp, all to do with the disk subsystem.

I always get bsods on battery after logging in for about 5 minutes. However, I get also get the bsod after coming off hibernation too. So I'm not sure if it's the battery. Also, what should I do about partmrg and the other drivers started? Thanks

If you're getting the same BSODs when coming off hibernation without using the battery, then it could be a hardware problem. Download the relevant diagnostic tools and test your hard drive. There's a list of links HERE (http://www.techspot.com/vb/topic7602.html).

It wont lemme install the Drive Fitness Test. Says "No Floppy disk available" when i try to install it.

Here's another :).

Just got ANOTHER new bsod. Btw, I have a HP Pavilion zv6000 notebook if that helps.

DRIVER_IRQL_NOT_LESS_OR_EQUAL


***STOP: 0x000000D1

camc6hal.sys-Adress F8097CB3 base at F8084000, Datestamp 41E46B89

Sorry if I'm posting too much. I'm just getting a bit frustrated.

The last two have a bugcheck of 50. Download Memtest86+ (http://www.memtest.org./) to test the RAM. As you don't have a floppy, you'll have to get the bootable ISO.

0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

So I download the Download - Pre-Compiled Bootable ISO (.zip)? I downloaded it and I dont have anything to open it with.

7-Zip. http://www.7-zip.org/.

After i download it then what?

Click (or double click) on the 7-zip file and it will install. When that's done you will be able to click the zip file that contains the ISO and 7-zip will open it, you can then extract it to a location of your choice. I'm hoping that you know how to burn an ISO image to disk, otherwise it'll be another program to download.

Sorry I don't know how to burn the ISO. I'm not with familiar with pcs.

The one and only time I wanted to burn an ISO, I used Deepburner (http://www.deepburner.com/?r=news&id=50). When you start it you get the option to burn an ISO image. This is the portable version, which means there's no installation required, just download it and extract the files to a folder and run it from there.

If you can get that done, you'll have to change the boot order in the BIOS. When you start the computer hold down the Del key (hopefully), then you'll have to find where it says first boot device, and change this to CD-ROM.

to burn iso with nero just click file->open then browse to the *.iso file and click burn

I keep getting BSODs when returning from Hibernation and/or Standby phases. I've done everything that the initial post referred to checking, yet still get BSODs everytime. I've included the last 4 minidumps, please help me fix this problem, as I cannot use my laptop for it's primary use - DLs - when it can't even stay booted for an hour with no activity! Thanks in advance.

Looks like you've got an infection of some type. Start a thread in the security forum asking about the file huy32.sys.

Image name: huy32.sys Timestamp: Tue Jan 16 05:41:59 2007 (45ABE717)

Unable to load image bcmwl5.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for bcmwl5.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl5.sys
Unable to load image huy32.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for huy32.sys
*** ERROR: Module load completed but symbols could not be loaded for huy32.sys

BugCheck 100000D1, {5, 2, 0, f81b6bce}
Probably caused by : bcmwl5.sys ( bcmwl5+abce ) <-- Broadcom driver.

Thanks, I'll get on that.