hi guys! can anyone help me to solve my problem on my pc! i use my pc regularly but in the middle of working it restarting the windows! a little help is appreciated thanx...
hoy
08-15-2008, 10:35 PM
pls. help me! email me : email removed
Ad
08-15-2008, 10:35 PM
nickc
08-15-2008, 11:12 PM
Post this in the right forum if u would.
tb421ny
11-13-2008, 06:14 PM
USe the seagate sea tools to check your drive, it works for every brand I have tried it on.
Berlonson
02-14-2009, 12:47 AM
if you have bad sectors on the hard disk, you'll need to low-level format it.
I would keep a lookout on the hard disk. Developing bad sectors are a sign of failure.
GBE300
03-19-2009, 06:18 PM
Hi All,
I see the list was last updated in 2007. I am starting to get a lot of "cyclic redundancy check" errors out of utorrent and I have not changed anything in months on this PC.
The drives are only a few months old ( 2 sata drives in a raid) and I am worried I may lose this stuff. I would love to hear some opinions on which of these would test best under vista. Thanks for any/all advice!
Cheers,
GBE300
jopower
04-06-2009, 08:14 AM
The util list is missing one of the all time greats: SPINRITE (now ver 6). I've used it off and on since the 20 MB drive days and it would always give you the straight dope. It would also resurrect many drives or at least run them long enough to save the data when all hope was lost. If you REALLY have troubles, go to Gibson Research for enlightenment. :cool:
see: GRC.COM
The site also has other good utils and excellent data on the function and testing of all hard drives, ancient and new.
My fave great little aplet: Shoot The Messenger (shut off or turn on Windows Messenger with ONE little util).
Billh
07-03-2009, 10:29 PM
Installed a SATA Seagate Barracuda 3.5 1.5TB. Documentation says: After installing, Disconnect the Primary Drive...after following directions, I find that windows no longer booted! I did change the Boot Sequence. Thus, I now have installed; (d) Seagate SATA; (C) Samsung 160GB; (j) External LaCie 500GB.
This configuration becomes rather confusing & I'd really appreciate assistance regarding Partitioning etc..particularly, what to move into the partitions.
I use the LaCie for backups thus I shut it down when not needed.
Thanks for any help.
Bill