I have had my system setup in a mulit-boot configuration. Option 1 was to boot from the primary-master IDE drive, the second was to boot from a SATA drive in RAID 0. Lost the primary IDE drive, and had to re-install. Lost the ability to boot from the SATA drive. My question is how do I configure boot.ini to be able to get it working again?
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
Primary master= 250G IDE
Primary slave=160G IDE
Secondary master=DVD
Secondary slave=DVD
SATA0=160G sata
SATA1=160G sata
(SATA0 &SATA1 are setup in RAID 0 config)
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
Primary master= 250G IDE
Primary slave=160G IDE
Secondary master=DVD
Secondary slave=DVD
SATA0=160G sata
SATA1=160G sata
(SATA0 &SATA1 are setup in RAID 0 config)
