It worked for a few hours then went out again. After getting the temps nice and warm it started working again. Ive been watching my temps, i think this laptop needs a heatsink upgrade or new thermal paste. its idle at 51C and anything over 40-50% load makes it shoot up to 70C. whenever i do any stress to this thing it probably is what caused it to stop working in the first place.

Anyone ever trying taking the heatsink off and applying some AS5?

i would personally suck this man off if i could right now and i am a straight man he just saved me 700 bucks, tips thats worked for me we take a cloth and block the the fan/heatsink completely , make sure you have an internet connection via cable or phone to download drivers after it detects it if ur running vista run the bubbles screen savers to raise gpu temp up i took mine to 103c before it detected been on web for 30 min now wirelessly works fine o ya thanks man this **** works highly recommend almost got a new laptop but this saved me some cash once again this actually fing works f hp and compaq this guy rocks

Worked for me too! gave up after running it at 80 degrees for half an hour then stopped and let it cool off and as it cooled down it found the network adapter and automatically installed drivers. Now we will see how long it lasts, have similar heat issue on HP tablet pc (tx1000) that I have fixed two times now and wont last for more than two weeks so far.

HP/Compaq Sucks, flat out, I used to repair them at the best buy service center and they have only gotten worse in my home repair experience since then.

HP/Compaq Sucks, flat out, I used to repair them at the best buy service center and they have only gotten worse in my home repair experience since then...

I repair all makes of laptops and HP/Compaq laptops are among the easiest to get repair parts at reasonable prices. Better than most manufacturers. I still say this "Orange Light" issue is a cold solder circuit near the CPU. I have never seen this issue in the shop. I would suggest that these Orange fixes be examined for dust contamination in the cooling system of the laptop

ok everyone I did a lot of the stuff you guys said, but did not try the heating up my system.
so I went to walmart and bought a compact wireless usb adapter. and plugged it in to my usb and wow it works orange lite still on but who cares. I can get on internet.
and for less than 50. its fixed

I have been a repair tech for almost ten years, and I just took in a laptop that had the orange light of death issue, as everyone else is/has been experiencing. I spent almost 30 minutes in a chat session with Compaq... having them 'walk me through' all of the tests that I have already performed (thinking maybe I missed something). I had already been through all of the HP support pages, so I already knew what they were going to tell me. I also already knew that there was an extended warantee (just did not know when it started/ended). They quoted me $400 to replace the mb, which I knew the client would not want to do... heh... I would not have recommended it as you can buy a cheap new laptop for about that much. So, I was just going to recommend that they purchase a cheap USB or PCMCIA adapter (after more research, it looks like the PCMCIA port stops working if the wireless adapter stops working (on the same circuit)). As I was browsing ebay for a cheap adapter, I did one more google search and found this forum. I was HIGHLY skeptical that this was going to work, and was more concerned that I might brick the laptop... but figured it was worth a shot (I'm sure that this thing has gotten hotter then 80 degrees based on the dog hair that I blew out of it.

It took me a while to get it up to temperature (I actually had to hold a towel under it to get it to come up to temperature). It went past 75 degrees and continued up to 80 degrees. It sat there for about three of four minutes, and then.... viola!

I had the networking devices in the device manager already open so that I could watch.... and I was EXTREMELY amazed that this actually worked. Has been running stable now for about an hour, and I'll keep it for a few days just to continue to test.

Anyway, thank you very much for posting your findings and results for the rest of us! Simple solutions to a complex problem are always very exciting

Hi, I'm a software engineer and I was searching around for the solution to this orange light problem. My wireless stopped working after my computer crashed while installing a wireless printer. I registered just to say this fix worked for me. I got the CPU temp up to 76C in about 9min. Just like the others it went and installed the drivers. Ill update you guys if and when it stops working, but until then I really think this is a legitimate fix, as absurd as it sounds. Though like the others, I can't recommend trying it unless you are willing to fry your motherboard.

I think i found a fix the cold solder join for wireless is very close to the GPU. The fix that javeous mentioned works but after restarting the system same problem orange light what i did was i used a pen torch on the GPU just like you do for the blank screen problem but what i did was i heated the gpu for extra couple of minutes and after that my WIFI is working just fine from couple of days i hope it stays that way if it stops working i will let you guys know

I have a v6000 which is having trouble with sound no audio output device found just like WIFI the audio device is not detected. Anyone here willing to help i would really appreciate it

Hey, I was just as skeptical as everyone else but I thought I'd register here just to say that the stress test solution works! (for now, it's been working for about 20 minutes, I will update in a few days)

I covered my heat exhaust vents with a blanket. I downloaded and ran everest ultimate and stressed only the CPU. It took about 15 minutes for the temp to get to 80, then I left it for another 20 minutes (temp climbed to about 82 in the last 3 minutes or so). After this I stopped the CPU torture and let it cool down. Within seconds the orange wifi light turned blue and I was connected to my wifi and could obviously go online etc.

Pretty incredible really! I first thought that it was a dust problem and the high RPM of the fans would blow out stubborn dust...but then why would it start working AFTER the CPU starts to cool down? Well, who knows but it works fine now. Thanks Javeous!!

Here's an update for anyone else that was wondering about this heat fix.

It seems to work fine as long as my laptop is on all the time (warm). Once I shut it off and leave it for a couple hours or so the wifi quits again and I have to do the heat fix again.

So for the last week or so I've just been leaving it on. I don't like doing that because the hard drive starts getting a little too warm for my liking. I've ordered a Cisco Linksys Expresscard N card w w w.linksysbycisco.com/APAC/en/products/WEC600N and will be installing that instead. USB adapters can be installed but takes up one of the only two USB ports available.

Ur a freaking genius man.

Read blogs for over 14 years never inspired to ever create an account or post results till today, kudos homie.

I've had tons of friends who bought the AMD version of dv6000 series laptops and almost all of their network cards fail at some point, all intels seem to tough it out.

Here's what i did as listed from previous posts.
1. Ran windows update made sure it was all up to date.
2. i got all the chipset updates, bios updates, graphic card updates, and then the brodcom network card drivers from the HP website. Installed all except broadcom which was previously installed anyway.
3. put my comforter under the laptop bundled it up snug, opened device manager on one side, broadcom driver folder on one side, network manager on one side, and everest.
4. ran the stress test for cpu only got to 15 minutes and about 84C and then it slowed down, so i ran bubbles screen saver pushed it to 19 minutes, temp got to 89.4C. (i did get a lil burning smell but that's the feathers in the comforter heating up)
5. pulled the blanket out fast put my text book underneath to let it breath.
6. the entire time i was searching for new devices in device manager, thought i had failed miserably.
7. as my system cooled down about 2C from 89 to 87 all of a sudden windows says "new device found, searching for drivers". I click find new devices and its there and drivers auto installed. Ran broadcom install anyway as backup.
8. Been letting my system cool down since and its still working.

I will let it cool to normal temps and then shut it off, reboot and see what happens, ill repost on results.

SCREW HP corp warranty policy.

The network adapter worked fine for a few hours then after a windows update and restart it stopped again.

Like others have posted i think the machine cooled down to much. When the temperatures reach about 70C the card enables again, if it drops under once activated its ok, but if put into hibernate, standby, restart or shutdown while its temps are far below 70C you will lose the card again.

I want to try heating to GPU unit with a pen torch but its a risk im not willing to take yet.

Good luck all.

Wow - this worked for me, too! Thanks, OP!

I'm running Ubuntu Linux. I loaded the cores with cpuburn (burnK7) and monitored the temps with "sensors". Covered the vents with a sock, let the CPU hit 80+ for 5 minutes or so, then killed cpuburn and removed the sock. Rebooted after 5 minutes of letting the laptop sit and to my astonishment, the light turned blue when the machine booted up!

Redonkulous! =P

Post removed

hey guys, i made a post over at my blog that alternatively fixes the orange light. let me know if it works for ya! it has to do with the actual motherboard wireless contacts getting dirty.

http://www.logisticsct.com/blog/2010...doom-resolved/

"Dirty contacts" mean that the connector contacts are oxidizing... Caig Industries makes professional contact cleaners and other chemicals. I use their products all the time. I am glad to hear the "real" cause of this HP loss of Wireless connectivity. Being a component-level Electronics tech, I knew there was a hardware cause to this issue

Ahh, Yeah I saw a bunch of black specs on a few of the contacts..wonder why it is oxidizing?

The copper plated connector metal was probably not formulated well by the Chinese manufacturers for this particular HP model...

It seems to happen quite a bit . this fellow in CT. had a suggestion that was at least part of my trouble with a machine that was given to me for parts I am trying to resurrect.
Do a search for /the-notorious-hpcompaq-wireless-orange-light-of-doom-resolved
as I have only made 1 other post here and they won't let you post a link until you have 5 as if that would stop someone determined to spread havoc.

He said he has fixed the problem on 3 HP laptops just by cleaning the contacts on the wireless card with a flat head screwdriver.
Mine was very dirty. The machine registered an IRQ7 fault and when I disassembled it the r11 jack{modem port} was totally broken off and I cannot buy one from HP as they no longer make parts for it an "obsolete" computer. Do you know what other HP that they still make parts for would have the same jack or who else would have them? HP just gives you a link to a used parts place that does not have them.

I don't know if either of these problems was causing the keyboard and mouse to freeze completely under windows and the machine to run dreadfully slow on Puppy Linux 431 but I hate to put it back together without the modem port although most people don't need it.