Physical memory dump blue screen error 2

Hi there,

searching through forums, I found that you solved a similar problem in another topic which is very similar to mine.
The error I get is: stop: 0x0000008E (0xC0000005, 0x80637625, 0xx5824799c, 0x00000000)

I have attached the last five minidumps. Help would be very appreciated, I have spent all day trying to fix this.

Thank you
Ernesto

Though nothing was given as the definitive cause all your error codes were the same 0x*E. This code is almost always caused by hardware and is a strong indicator of corrupted memory.

Therefore we suggest that you run memtest on your RAM for a good solid diagnostic proceedure. We are not saying you have bad memory but with your error codes we need to rule it out or confirm.

See the link below and follow the instructions. There is a newer version than what is listed; use the newer. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.

There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Step 2 – Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


Link: https://www.techspot.com/vb/topic62524.html


* Get back to us with the results.