I succefully locked apg/pci to 66/33
using the ratio's in the bios.
ddr400 @ 402
GPU OC'd @ 425/1.10
Seems very stable so far, no bench test yet.
PC pitstop results
I installed a zalman vga cooler vf700-cu
dropped my gpu temp 25°f

idle Temperatures
Motherboard 30 °C (86 °F)
CPU 33 °C (91 °F)
GPU 45 °C (113 °F)
GPU Ambient 36 °C (97 °F)

CPU Type Intel Pentium 4, 3000 MHz (18 x 167)
CPU Alias Prescott
CPU Stepping E0
Instruction Set x86, MMX, SSE, SSE2, SSE3
Original Clock 2400 MHz
Min / Max CPU Multiplier 14x / 18x
L1 Trace Cache 12K Instructions
L1 Data Cache 16 KB
L2 Cache 1 MB (On-Die, ECC, ATC, Full-Speed)
CPU Properties
CPU Type Intel Pentium 4
CPU Alias Prescott C
CPU Stepping E0
Engineering Sample No
CPUID CPU Name Intel(R) Pentium(R) 4 CPU 2.40GHz
CPUID Revision 00000F41h

CPU Clock 3005.83 MHz (original: 2400 MHz, overclock: 25%)
CPU Multiplier 18.0x
CPU FSB 166.99 MHz (original: 133 MHz, overclock: 26%)
Memory Bus 200.39 MHz

CPU Cache
L1 Trace Cache 12K Instructions
L1 Data Cache 16 KB
L2 Cache 1 MB (On-Die, ECC, ATC, Full-Speed)

Motherboard Properties
Motherboard ID 08/27/2004-PT880-8237-6A7L2A19C-14
Motherboard Name Abit VT7 (5 PCI, 1 AGP, 4 DDR DIMM, Audio, LAN)

Chipset Properties
Motherboard Chipset VIA Apollo PT880
Memory Timings 2.5-4-4-9 (CL-RCD-RP-RAS)
Command Rate (CR) 2T

Any suggestions on ram timmings?
SPD Memory Modules
DIMM1: Infineon AED660UD00-500C88X 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)

Graphics Processor Properties
Video Adapter BFG nVIDIA GeForce 6800 GT OC
GPU Code Name NV40GT (AGP 8x 10DE / 0045, Rev A1)

Hi
http://www.techspot.com/vb/topic14533.html

Not a bottle neck I'd want to mess with.
It's still running stable.
Runs Unreal II awakenings very well @
1280x1024 32 all settings high.
I will try a bench mark in the morn...
Thankz for the lead on the thread! Blakhart

Hi
Well, I think one should reduce mem timings if they can do so with stability. Just because mem is rated by the factory at 8/3/3/3 does not mean that it can't do better, and I always shoot for 6/2/2/2 no matter what the fsb is, if that set is unstable, I do the next; 7/2/2/2 and test again, ad infinitum. Upping the voltage to memory can help. I use memtest exclusively, and with it find the mem timings that reduce latency to the bare minimum, while resulting in best bandwidth for that specific system's mem and fsb.
I feel that reducing mem timings/latency is needed for any online activity that demands absolute responsiveness. This includes fps games and flight sims.

As minimal an OC (26%+ 600mhz increase), it's amazing how stable and cool
my system is running! Not alot of noticable system speed increase.
The zalman vga cooler dropped the 6800 temps (under load) to no higher than
117f, it used to be 146f. unreal II, UT2004

I messed around in the bios, and could not find a higher ratio that locked
the agp/pci @ 66/33.
What can I expect from value MoBo?

VIA never came out with a working lock for the
North Bridge VIA Apollo PT880 chipset. Abit vt7
I now this cpu can go to 3.6/7 with good cooling but I'm looking around for
intel chipset to do it.