Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Login to participate.

Go Back   TechSpot OpenBoards > Hardware & Tweaking > Overclocking, Cooling and Modding

I found my problem!

Reply
Bookmark / Share this page
Thread Tools
  #1  
Old 06-18-2007
Newcomer, in training
 
Location: Israel
Member since: May 2007, 15 posts
I found my problem!

I posted here recently about my overheating GPU, so i finally took the computer to the shop and the dude there told me that my case is rly tiny sized (micro) and that there is no way to add any fans.

He said that the 2 Cd/Dvd drives and the 2 Harddrives are rly close together and that they are generating massive heat. The guy there offered me a Midi case (dunno what company) which is taller than what i have and the harddrives will be placed on the bottom and there will be alot more room for airflow.

What i want to ask here is what kind of case would u recommend me? Not something insane, something that could keep my card in the 60's - 70's under load. My GPU is a Gigabyte 8600GT which relies on passive cooling and my motherboard is an ASUS P5VD2-MX with only 4 expansion slots so i think it might be considered a mini motherboard. And the PSU is 500WATT and the new one will also be a generic 500WATT PSU. Thanks
Reply With Quote
  #2  
Old 06-18-2007
CCT CCT is offline
TechSpot Evangelist
 
Location: Canuckistan
Member since: Apr 2007, 3,122 posts
http://www.pccasegear.com/category79_1.htm
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
  #3  
Old 06-18-2007
Phantasm66's Avatar
TechSpot Evangelist
 
Location: Glasgow, Scotland
Member since: Feb 2002, 6,600 posts
If you are worried about heat but also want to have lots of drives and fans and stuff get yourself a good full ATX tower.
Reply With Quote
  #4  
Old 06-18-2007
SNGX1275's Avatar
TS Special Forces
 
Location: Rolla, Missouri, USA
Member since: Feb 2002, 8,215 posts
System specs
I built a comp last week with this case, I was pretty impressed, and it will allow good airflow. You could even fix a 80mm to the side where there are vent holes to blow directly onto your GPU.
Reply With Quote
  #5  
Old 06-18-2007
Newcomer, in training
 
Location: Israel
Member since: May 2007, 15 posts
I was wondering if moving the motherboard to another case is a dangerous procedure. The motherboard could get damaged if its screwed too tightly or if its not screwed tightly enough it could fall...
(the guy at the shop will be doin it).
Reply With Quote
  #6  
Old 06-18-2007
CCT CCT is offline
TechSpot Evangelist
 
Location: Canuckistan
Member since: Apr 2007, 3,122 posts
Simple procedure, anesthesia NOT required. Simple power down and disconnect is adequate.

Reply With Quote
  #7  
Old 06-19-2007
SNGX1275's Avatar
TS Special Forces
 
Location: Rolla, Missouri, USA
Member since: Feb 2002, 8,215 posts
System specs
No, switching cases is not difficult or very dangerous. Make sure you put the motherboard offset spacers in (usually brass) before you screw in the motherboard. Then just screw in the motherboard like normal, as long as you aren't really trying you won't screw it in too tight, screw in to the point you know it won't come out - you should be able to easily tell when it is in securely.
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
  #8  
Old 06-19-2007
Billy213's Avatar
TechSpot Member
 
Location: Essex, England
Member since: Jan 2007, 58 posts
i suppose this man will be charging you just to switch all your components?
Reply With Quote
  #9  
Old 06-19-2007
Tmagic650's Avatar
TechSpot Evangelist
 
Location: Billings, Montana USA
Member since: Aug 2006, 7,065 posts
System specs
Quote:
Originally Posted by SNGX1275
I built a comp last week with this case, I was pretty impressed, and it will allow good airflow. You could even fix a 80mm to the side where there are vent holes to blow directly onto your GPU.
I built 2 systems using this case last month. I was very impressed with it too. The price was fantastic for the quality of the case. I would have expected a much poorer construction for the low cost
Reply With Quote
  #10  
Old 06-19-2007
mailpup's Avatar
TechSpot Evangelist
 
Location: Los Angeles
Member since: May 2005, 3,698 posts
System specs
One thing I like about this case, although I've never used it, is it doesn't come with a power supply. That means you don't waste any money toward a cheap power supply you'll have to replace anyway.
Reply With Quote
  #11  
Old 06-19-2007
CCT CCT is offline
TechSpot Evangelist
 
Location: Canuckistan
Member since: Apr 2007, 3,122 posts
I think, given ambients where you live, this case would be great and re-use your present psu: Lian Li PC-7S

http://www.pccasegear.com/prod5301.htm
Reply With Quote
  #12  
Old 06-19-2007
Tmagic650's Avatar
TechSpot Evangelist
 
Location: Billings, Montana USA
Member since: Aug 2006, 7,065 posts
System specs
I bought Cooler Master 450 Watt power supplies to go with this case. Another $39 per case
Reply With Quote
Reply
Thread Tools

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
OS not found Cdub Other Hardware 5 01-10-2007 02:26 AM
"page not found" spyware problem rainyhands Security and the Web 2 12-14-2006 03:49 PM
found a problem after downloading Firefox, but i cant figure it out redleg68 Security and the Web 8 05-25-2006 12:45 AM
404 not found achan Storage & Networking 1 11-08-2005 02:30 PM
WEBNTACCESS new hardware 4 MSI found by XP but no driver found ezrab Device Drivers 0 06-19-2005 01:28 AM


All times are GMT -4. The time now is 10:56 AM.