TechSpot - PC Technology News and Analysis

Hi all, recently I modified my bios for my laptop (Acer Aspire 5630); the only thing I changed was the logo at the splash screen. This was done with Phoenix Bios Editor 2.2 Pro. I saved the file, then I flashed it using WINPHLASH, and it got to the end Block 17 out of 17, where it froze. I could not power down the computer at all. The only option, was to unplug the AC Power, and take out the battery. After doing this, I plugged the battery and AC Power back in, and pressed the power button, the computer does not even power on; no leds come up, nothing. I have read about crisis recovery discs, but this cannot be done if the computer does not even turn on. My question is, is there any trick, or any way to fix this without sending it back for RMA to ACER?

Try unplug the AC Power, and take out the battery and then hold the power button down for 30 secs (releasing any internal voltage)

Replug the power cord back in (battery can wait) and try again.

Just tried that to no avail. Anyone have any other suggestions? I really need the laptop. The only thing that happens is that when I plug in the AC Adaptor, the laptop's two front lights are dim orange. Barely visible

you can try kimsland's approach again with as much as possible hardware off the laptop. unplug hdd, memory, pcmcia cards, mini-pci cards, everything that you can unplug.
if that doesn't help you might have a broken bios which usually makes a doorstop out of a laptop. you could fix this with a new chip or have a look at the bios manufacturer site for solutions.

wish you good luck!

edit:

also check the acer site for faq on error messages like the two light dim orange

try to reflash follow direction to the T and hopefully you can recover it from the bad flash

I sent it in to Acer to fix it, however what do you mean by "follow direction to the T". Remember though that I cannot power on the laptop at all

My bad lol. I misread the info. Glad you were able to send it in!

there's recovery procedure for this acer model(AFAIK) with Fn-B keys combination and with the USB-floppy drive with crisis disk inserted.
1. remove main battery
2. connect USB-floppy with crisis disk
3. hold down Fn+B keys
4. plug the AC
5. turn on laptop WITH pressed Fn+B keys.
6. wait for bios reflash approx 5 min.
7. if needed, turn off laptop

I already tried that method; starting the laptop up with the Fn+B keys, then while holding those press and hold the power button. Tried that; did nothing for me. The laptop does not power on at all whatsoever.

so, there's only way to reflash bios chip with external programmator.

Or having another working chip (removable?)

Boot up with working chip
Go to cmos
Unplug the onboard bios chip (live)
plug in the faulty bios chip (live)
Save defaults (F10) to the faulty bios chip
Restart

That's what we did a long time ago, but no one does it anymore
I do appreciate, you will need 2 chips (so please don't answer with WTF)
But this did work on the older computers, it also removed passwords too.

kimsland, if you don't know, don't speak! the CMOS data aren't stored in the bios chip.

Thank-you for your helpful info lamo (!)

Although my above scenario of going to cmos and replacing the bios chip works!

Could please elaborate on why you think it won't (try to reply in a helping way, if possible)

I am fully aware of the definitions of bios chip, cmos settings, so don't go there.

Also I also programmed bios chips (think they were 6 or 8 in a row eproms) Note I have not searched any info at all, this is just a fact in what I have done at a previous (long time ago) job.

If you would like to provide actual information that would be good (think of it as trying to teach me!)
Is it possible to replace the bios chip only
Is it possible to save cmos to a faulty bios (possible not - unless the chip is not faulty, but just missing the cmos part)

So if you know, do speak! (strange sentence I know!)

will explain it. the CMOS data are stored in the southbridge memory(yes, the 82801DBM, for instance, has a energy-dependent memory for CMOS data), at least, this scheme works in almost all laptops. the BIOS ROM image stored in the BIOS chip(SST39vf080 for example). when you press the F10 key to quit the CMOS setup, you will just renew the CMOS data in southbridge memory, but NOT in the bios chip.
and as for this case: due to not-PLCC32 BIOS chip package(in most laptops) - it is very difficult(impossible) to do the flashing chip "on-the-fly".