TechSpot

Bios+Motherboard failure need imminent help

By Zilliak
May 24, 2008
  1. I bought a new biostar p4m00-m4 motherboard sockett is 478 and it runs a pentium 4 processor at 2.6 ghz. i had everything in stalled correctly and everyhting running smoothly until i went to update the bios with its flash utility. MIdway through the update power cut off and bam i was done for.... now the problem is when i boot everything cuts on except the monitor. it gets a signal but it goes in to power save mode...is there any suggestions any one can get me
     
  2. raybay

    raybay TS Evangelist Posts: 7,241   +9

    What power cut off. I have never seen a system board survive a BIOS update that was interrupted by by any power shutdown. We would be surprised if you can get that board back to a reliable working state. Call your dealer or BIOStar tech support if you fee BIOStar caused this BIOS update failure.
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...