TechSpot

blue screen plz help

By hunter316
Sep 17, 2005
  1. i get the error driver_irql_not_less_or_equal

    this is what i get
    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.

    plz can u tell what the prob is thanks :)
     

    Attached Files:

  2. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 25,948   +19

    Hello and welcome to Techspot.

    cpc2004 is the minidump guru around here. I`m sure he will take a look at your dump files when he gets time.

    In the meantime. It`s probably a good idea to test you ram for errors.

    Download and run the Memtest86+ programme from www.memtest.org.

    Let the programme run for at least seven passes. If you don`t have a floppy drive, there is a pre-built iso version that you can burn to cd, and then boot from that.

    Regards Howard :wave: :wave:
     
  3. cpc2004

    cpc2004 TS Rookie Posts: 2,044

    Hi Hunter316,

    I've investigate your mnidump and the culprit USB100TX.sys (network card driver). However you must aware that one minidump cannot confirm the culprit. For example, if hardware errors when USB100TX.sys is running. The culprit is hardware. If you have provide all system event 1001 and 1003 within this two months. I can confirm my finding from the event log. Some crashes may have multiple culprits.

    BugCheck 100000D1, {8, 2, 0, f8328c00}
    Probably caused by : USB100TX.sys ( USB100TX+862 )
     
  4. hunter316

    hunter316 TS Rookie Topic Starter

    ok here we go :)

    The computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0xc0000005, 0xf8800121, 0xf5a8a618, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini091705-01.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000008, 0x00000002, 0x00000000, 0xf8328c00). A dump was saved in: C:\WINDOWS\Minidump\Mini091605-02.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000008, 0x00000002, 0x00000000, 0xf8328c00). A dump was saved in: C:\WINDOWS\Minidump\Mini091605-01.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000008, 0x00000002, 0x00000000, 0xf8328c00). A dump was saved in: C:\WINDOWS\Minidump\Mini091305-01.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x1000000a (0x00000166, 0x00000002, 0x00000000, 0x804e5433). A dump was saved in: C:\WINDOWS\Minidump\Mini091205-01.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000008, 0x00000002, 0x00000000, 0xf8328c00). A dump was saved in: C:\WINDOWS\Minidump\Mini090805-01.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0xc0000005, 0xf7c0dae0, 0xf6659b70, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini083105-01.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000008, 0x00000002, 0x00000000, 0xf8328c00). A dump was saved in: C:\WINDOWS\Minidump\Mini083005-01.dmp.


    Error code 1000008e, parameter1 c0000005, parameter2 f8800121, parameter3 f5a8a618, parameter4 00000000.

    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.

    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.

    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.

    Error code 1000000a, parameter1 00000166, parameter2 00000002, parameter3 00000000, parameter4 804e5433.

    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.

    Error code 1000008e, parameter1 c0000005, parameter2 f7c0dae0, parameter3 f6659b70, parameter4 00000000.

    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.


    i put all my mini dumps in zip theres 3-4 in each zip

    thx
    trevor
     

    Attached Files:

  5. cpc2004

    cpc2004 TS Rookie Posts: 2,044

    Hi,

    From yoir reply, I find 5 windows crashes at the Lan card device driver at the same instruction address. I confirm that it is software error at the lan card device driver is faulty.
     
  6. hunter316

    hunter316 TS Rookie Topic Starter

    thanks a lot i have uninstalled the driver and downloaded the linksys driver from there website and so far so good i'll let u know how it goes

    and Thanks a lot :)
     
  7. hunter316

    hunter316 TS Rookie Topic Starter

    computer has been blue screening a lot less just mybe once aday from 4-5 times a day if i post a couple more will u check it ooout for me :)


    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.

    The bugcheck was: 0x100000d1 (0x00000008, 0x00000002, 0x00000000, 0xf8328c00)

    Error code 10000050, parameter1 a374ae4c, parameter2 00000000, parameter3 804edcd0, parameter4 00000000.


    Error code 1000008e, parameter1 c0000005, parameter2 f8920121, parameter3 f4fed630, parameter4 00000000.

    Error code 100000d1, parameter1 00000008, parameter2 00000002, parameter3 00000000, parameter4 f8328c00.
     
  8. cpc2004

    cpc2004 TS Rookie Posts: 2,044

    From your minidump, you haven't upgraded the failing module. Of course it still crashes.
     
  9. hunter316

    hunter316 TS Rookie Topic Starter

    i deleted the network driver like ya said and installed the update driiver from linksys
     
  10. cpc2004

    cpc2004 TS Rookie Posts: 2,044

    Hi,

    It is the same version.
     
  11. hunter316

    hunter316 TS Rookie Topic Starter

    It's the only one the website has the first one was on a disk guess the website only has that one any idea how i can get a diff ver
     
     
  12. cpc2004

    cpc2004 TS Rookie Posts: 2,044

    Hi Hunter316,

    I can find out the culprit and you have to find out solution. Network card is cheap. Buy a new card.
     
  13. keigo

    keigo TS Rookie

    s.o.s

    - removed as a new thread - :blush:
     
  14. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 25,948   +19

    Hello keigo and welcome to Techspot.

    Please would you start your own thread in the Windows OS forum.

    This is because it makes dealing with, and reading threads much easier for everyone.

    Thanks.

    Regards Howard :wave: :wave:
     
  15. solid

    solid TS Rookie

    Hi ppl this is the first time i post, i would like to know if someone can help me with this, i have let my pc today with emule running and when i arrived home (half an hour ago) i suprisly see that my pc have restarted, so i went to see in computer management what was the cause of the error but i cant "read" that thing. The numbers that appears are this
    "The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x86fd49e4, 0x0000000a, 0x00000000, 0xf7877479). A dump was saved in: D:\WINDOWS\Minidump\Mini111105-01.dmp.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."

    what is the cause of this error?
    Is someone could tell me how to "read" this i would be very apreciated ;)

    EDIT: I have now see that i cant post a reply hasking for the same question, and i have to create a new treath :eek: , if someone could please tranfer this i would be apreciated :eek:
     
  16. cpc2004

    cpc2004 TS Rookie Posts: 2,044

    Hi Solid,

    Open a new thread for a new problem. Your windows is crashed at IRQL x'A' which is usually caused by hardware error.
     
  17. sko

    sko TS Rookie

    I have problems

    Hi, anyone know what my problem is? Windows/Computer keeps rebooting (randomly), and a friend helped me find error;

    What do I do to fix this?
     
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.