TechSpot

BSOD 0x0000007F

By Botch
May 13, 2008
Topic Status:
Not open for further replies.
  1. I've read up on it but can't figure it out the dreaded BSOD 0x0000007F.
    I have my last 5 minidumps ziped and am going to attach them. If someone can assist my life will make sense again!! Thank you so much TechSpot!
     
  2. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    Inside the 5 MiniDumps:
    sisnic.sys: SiS PCI Fast Ethernet Adapter Driver

    Please update your Network Drivers (usually motherboard drivers in full)
     
  3. Botch

    Botch TS Rookie Topic Starter Posts: 28

    Ill try it right now. Thank you so much kimsland!! How do I find my exact motherboard model??
     
  4. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

  5. Botch

    Botch TS Rookie Topic Starter Posts: 28

    I actually just crashed after I posted that. It was different

    IRQL_NOT_LESS_OR_EQUAL

    0x0000000A (0x7EC1D3D4,0x00000002,0x00000000,0x804DA08A)

    Im sure you already know it begins a dump of physical memory. Im gonna go grab those drivers for my mb.. Ill google my mb specs.
     
  6. Botch

    Botch TS Rookie Topic Starter Posts: 28

    Okay my network drivers are updated.. Hopefully I wont get either BSOD!!! Thanks for your help so much kimsland!!
     
  7. Botch

    Botch TS Rookie Topic Starter Posts: 28

    I just got another BSOD it was the 0x07F

    Different coding this time

    (0x00000008$0XF7BOED2O, 0x0 , 0x0
     
  8. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    Can be Ram related, you could try Memtest (for 7 passes)
    Sometimes it's software like Norton AntiVirus or Virtual softwares, that needs to be uninstalled.
    Can be a build up of Temp files. Running CCleaner is a good idea.
    And it can be Malware related, good idea to run a full scan
     
  9. Botch

    Botch TS Rookie Topic Starter Posts: 28

    so I figured I couldn't get the bsod to go away so I just formated the entire drive.
    Good thing is the BSOD's stopped.
    BAD THING is that when im trying to run a program that invloves date transfer from my computer to the internet 1 minute in the computer screen will go black and I will be and the beggining of the boot screen.
    I DID replace the ram. Still didn't help..
    Im going to post my minidumps again hopefully that will help

    AND I HAVE UPDATED MOST OF MY DRIVERS!! INCLUDING MY NIC CARD
     
  10. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    Inside the 5 MiniDumps:
    Still says Network Driver!

    Please un-install your current Network Driver and try this one: http://www.sis.com/download/agreement.php?id=153181&url=download_step1.php?id=153181
    (Actually download the driver first :) )
     
  11. Botch

    Botch TS Rookie Topic Starter Posts: 28

    And as far as system specs go
    Motherboard : Foxconn 478Socket 661M03-G-6L
    Chipset : SiS 661FX/GX
    Network Card : SiS 900-Based PCI Fast Ethernet Adapter
    Processor : Intel Pentium 4 @ 3000 MHz Hyperthreaded
    RAM SLOT#1: DDR-SDRAM PC-2700 (166 MHz) - [DDR-333]
    RAM SLOT #2: DDR-SDRAM PC-2100 (133 MHz) - [DDR-266]

    VIDEO CARD: NVIDIA GeForce FX 5500
    Bus Type : AGP
    Total Memory : 256 MB
    Texture Memory : 306 MB
    Processor : GeForce FX 5500
    Converter : Integrated RAMDAC
    Refresh Rate (min/max) : 60/85 Hz
    Codename : NV34
    Revision : B1
    Bus : 128-bit
    Memory Type : DDR
    GPU Frequency : 270 MHz
    Memory Frequency GPU : 405 MHz
    Texels : 1300 MTexels/s
    DirectX Support : 9.0
    Pixel Shader Version : 2.0

    nForceware Configuration :
    Standard 2D : GPU: 270 MHz - Memory: 400 MHz
    3D Performance : GPU: 270 MHz - Memory: 400 MHz
    ForceWare Version : 6.14.11.7516

    GPU Configuration :
    Technology SLi : No
    AA Mode : OFF
    Frame Buffered : 3

    Video Bios Information :
    Date : 02/19/04
    Version : Version 4.34.20.69.00
    ID : Version 4.34.20.69.00
    Bios SignOn : GeForce FX 5500 BIOS
    Forceware : 6.14.11.7516
     
     
  12. Botch

    Botch TS Rookie Topic Starter Posts: 28

  13. Botch

    Botch TS Rookie Topic Starter Posts: 28

    Im doing the add hardware wizard and it shows two Ethernet cards.
    SiS 900-Based PCI Fast Ethernet Adapter
    and
    1394 Adapter
     
  14. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    I should say, this is a test!

    Try the top one!
     
  15. Botch

    Botch TS Rookie Topic Starter Posts: 28

    I uninstalled it. And reinstalled the ones you showed me. Now lets test it out!!!
     
  16. Botch

    Botch TS Rookie Topic Starter Posts: 28

    crashed immediately after starting download ;(
    included minidump
     
  17. Botch

    Botch TS Rookie Topic Starter Posts: 28

    I think that might have been the exact same drivers I had
     
  18. Botch

    Botch TS Rookie Topic Starter Posts: 28

    Where are you kimsland?!?! Im lost without you!!
     
  19. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    Damn!

    Probably same driver, who cares now :(

    I'm thinking a new Network card !

    Actually it is possible there's some program (Antivirus or Virtual drive, or maybe even Torrent software), that you have conflicting with your Network driver.

    What AV do you have anyway (Here we go it's Norton lol)
     
  20. Botch

    Botch TS Rookie Topic Starter Posts: 28

    Umm... No anti virus actually. Its a fresh format + install of windows. I think noton came with it on auto install.. I Cant find it in Add / Remove hardware
     
  21. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    Damn can't remeber if it's Xp or not
    I think it is
    Go to Windows Updates->Custom
    And download (if you can!) Xp Service Pack 3 (genuine)
    Fully install it

    Lets leave AV out for the moment

    The new card idea still sounds good :)

    Also,
    I need to sign off for awhile

    And think of it this way, I haven't actually helped :(
    But we have tried a few things.
    I wonder if any others have any ideas (be aware that others do read these threads)
     
  22. Botch

    Botch TS Rookie Topic Starter Posts: 28

    installing new nic card now.. hopefully it will auto detect the model. Its a D-link
     
  23. Botch

    Botch TS Rookie Topic Starter Posts: 28

    ill burn my computer before I ever install another service pack!!!
     
  24. kimsland

    kimsland Ex-TechSpotter Posts: 18,353

    lol

    No the Service Packs do help

    SP3 does all the updates since the release of Xp
    Some of these security updates are for stability !!

    Anyway if the D-Link works with the correct drivers, make sure to disable the original net card (either in Device Manager or CMOS (that press DEL message when starting your computer.

    Once SP3 is installed (hint hint) you can then re-enable the net driver, and test again.
     
  25. Botch

    Botch TS Rookie Topic Starter Posts: 28

    THE BSOD IS GONE!!! But now it just restarts wihtout the window!! lol
    It happens maybe once, twice a day. Just restart out of no where.. cant figure it out
    Attached are my minidumps

    And if you want to include a specific pack... I will be more than willing to do that... Considering this whole incident started with xpsp2
     
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.