BSOD Event ID 1003 Help (Mindump Read Needed)

By DJ_Quaaludes
Jun 22, 2007
  1. Hey Gang,

    Recently I began encountering a BSOD problem with Windows XP. Basically the system will start up, and then the BSOD will occur within 30 seconds of Windows starting, forcing a reset. The error looks something like "driver irql not less or equal" and has event ID 1003.

    Error code 100000d1, parameter1 0000002a, parameter2 00000006, parameter3 00000000, parameter4 ba6fcafb.

    I have included links to a couple of the minidumps produced after the error. Is there anyone out there that can read them and help me identify the culprit? Thanks in advance :D
  2. raybay

    raybay TS Evangelist Posts: 7,241   +9

    If you have not already done so, you might want to take a look in the Microsoft Knowledgebase at to see if there is anything there relevant to your problem. In the meantime we will be reviewing your dumps.
  3. peterdiva

    peterdiva TechSpot Ambassador Posts: 1,088

    All the dumps crash at si3112r.sys, which is a part of the Silicon Image SATA drivers. See if you can update these drivers.

    BugCheck 100000D1, {2a, 6, 0, ba6fcafb}
    Probably caused by : si3112r.sys ( si3112r+7afb )
    ba6f5000 ba70a020 si3112r si3112r.sys Sat May 31 07:05:29 2003 (3ED7E3B9)
  4. DJ_Quaaludes

    DJ_Quaaludes TS Rookie Topic Starter

    Thanks Peterdiva...I will try that and post the results.
  5. DJ_Quaaludes

    DJ_Quaaludes TS Rookie Topic Starter

    Thanks guys, updating the SATA drivers has appeared to work for the time being. My guess is that when I recently installed my new fuji camera there was some sort of driver conflict.

    Many thanks again!
  6. raybay

    raybay TS Evangelist Posts: 7,241   +9

    Thank you for keeping us updated. Hope that problem is at rest now.
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...