TechSpot

bugcheck 0x100000d1

By dml33
May 5, 2006
  1. Hi.

    (Sorry, I posted it before in Drivers, instead of here).

    My Win XP SP2 is restarting every half an hour, giving these bugchecks:

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x1bd80058, 0x00000006, 0x00000000, 0xf756610a). A dump was saved in: C:\WINDOWS\Minidump\Mini050506-05.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x1bd80008, 0x00000006, 0x00000000, 0xf756610a). A dump was saved in: C:\WINDOWS\Minidump\Mini050506-04.dmp.

    The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0xa3b01838, 0x00000006, 0x00000000, 0xf7569859). A dump was saved in: C:\WINDOWS\Minidump\Mini050506-02.dmp.

    The IRQ 6 is related to the floppy disk controller. The Memory Segment 0xF0000000-0xF7FFFFFF belongs to the graphic card: GeForce FX 5200.

    In linux, OpenSuse 10.0, the X-Server was crashing periodically and the whole KDE restarting, so I thought the former graphic card (Matrox Parhelia) was the culprit...

    I've changed it to the GeForce FX 5200 and still crashes! even in the same memory addresses!

    I've run the memtest86 v3.2 for 17 hours, 33 passes and no errors found.

    I've noticed it crashes much more frequently while using BOINC for the SETI program.

    The temperature of the CPU (with SpeedFan v4.28) is 34C, while running SETI it rises to 47C.

    Please, any help?

    Thanks a lot,

    Dario
     
  2. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Hello and welcome to Techspot.

    All your minidumps crash at symmpi.sys. This is the LSI Logic Fusion-MPT MiniPort Driver. Try updating this driver.

    Regards Howard :wave: :wave:
     
  3. dml33

    dml33 TS Rookie Topic Starter

    Thanks a lot, howard_hopkinso for your fast reply :)

    I had already the last version of the symmpi.sys Miniport Driver, 1.20.18 for XP... but it was crashing as crazy... even every 15 minutes.

    I've just updated the firmware of the Ultra320 SCSI card to the last one available, and I'm around 50 minutes without a crash... (I touch wood, we say in spanish :D). I hope it works...

    I'll let you know :) Maybe the new version 1.20.18 had incompatibilities with old firmwares... It's quite strange.

    Thanks, again,

    Dario
     
  4. dml33

    dml33 TS Rookie Topic Starter

    :(

    I'm desperated :( It still restarts! I've downgrade the symmpi.sys module to the 1.08 version, the one that the SCSI board was bringing but it also crashes... I've cleaned the registry with Registry Mechanic and nothing... Even in Safe Mode it restarts...

    Since Linux, OpenSuse 10.0 with kernel 2.6.13 also crashes (the KDE restarts, loosing everything you were doing), I'm beginning to think that it's a hardware problem. The SCSI board may be damaged...

    What else can you recommend me? An Ultra320 SCSI board is not cheap... I cannot tell my boss to buy another one just because I think it's the problem...

    Maybe the 2 hard disks attached to the controller may be wrong and make it crash?

    It's killing meeeeeeeeee, 7 restarts only during this morning!!

    Thanks a lot,

    Dario
     
  5. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    I suggest you post more minidumps, then I can try and find out what the culprit is.

    Regards Howard :)
     
  6. dml33

    dml33 TS Rookie Topic Starter

    Thanks, Howard :)

    I'm attaching one minidump of today plus 2 or 3 of tuesday. I guess we cannot get more info if we cannot debug the symmpi.sys driver itself...

    What do you think about the SCSI board failing? not just only a software problem?

    I've read some manuals from this page and I've changed the ATX Power supply for another one, just in case. The current one was 350W, but only had the 20-pin ATXPWR connector. I mean, the mainboard has also a 4-pin ATX +12V power plug "to provide sufficient power to the CPU". I've replaced it for a 250W old Power supply, with both 20-pin and 4-pin connectors. It has restarted only once... instead of the expected 6 or 7... Maybe it helps ;) What do you think about this? Anyway 250W looks to me quite little for a P4 3 GHz, SCSI board, 3 hard disks, 1 CDRW, 2 ethernet cards and a GeForce 4...

    Thanks a lot for spending this time with our crazy problems :D

    Regards,

    Dar
     
  7. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    All your latest minidumps crash with exactly the same problem. I.E symmpi.sys.

    This is either a driver fault at symmpi.sys, or a hardware fault with the card itself, as you suggested.

    Regards Howard :)
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...