TechSpot

Connect a Huawei B260a to Netgear network

By valid
Sep 6, 2011
Post New Reply
  1. Hi all,

    I have a Pre-existing repeating netgear network of a WNR2200 router set up as a base station with a harddrive plugged into it as a network device (readyshare) and another WNR2200 router set up as a repeater.

    I want to supply this network using Huawei B260a modem (on the Three network).

    I currently have this setup;
    The b260a IP is 10.0.0.1 subnet 225.225.225.0 and has DHCP turned on (range 10.0.0.100 - 10.0.0.200).
    This is plugged into the internet lan port of the base station wnr2200.
    The base station IP is 192.168.1.1 subnet 225.225.225.0 and has DHCP turned on (range 192.168.1.2 - 192.168.1.254)
    The repeater Wnr2200 is automatically an access point and has an IP of 192.168.1.254

    This setup works but the speeds are around 1-2mb slower when connected to the netgear network than if connected directly to the B260a.

    Any help with this would be greatly appreciated.
     


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.