Could someone Please read my minidumps?

Status
Not open for further replies.
Hi there, I'm new to the community here - just wish it was under better circumstances. I have my first - newly built system finally running and am having some problems.


If there is any info I left out, please let me know any help would be really appreciated!

I attached a zip of the 2 minidumps.

thanks in advance
 

Attachments

  • Minidump.zip
    28.3 KB · Views: 5
+

When I saw the BSOD it read this...

*** STOP: 0X0000007E (0XC0000005, 0XF5CCF569, 0XF63DB8F4, 0XF63DB5F0)
*** NDIS.SYS - ADDRESS F5CCF569 BASE AT FCCF000, DATESTAMP 48025d03

Beginning dump of physical memory
physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.
 
MiniDump 070608-01:
BugCheck 1000007E, {c0000005, f5ccf569, f63e78f4, f63e75f0}
Probably caused by : rtl8185.sys ( rtl8185+77fd )

MiniDump 070708-01:
BugCheck 1000007E, {c0000005, f5ccf569, f63db8f4, f63db5f0}
Probably caused by : rtl8185.sys ( rtl8185+77fd )

There are quite a lot of different problems that can occur with this Bugcheck(0x7E), including incompatible hardware, a faulty device driver or system service. Since the Realtek driver is mentioned as the probable cause for both Mini Dumps it must be the wrong driver for the network card or faulty.
Try downloading the Network Card Driver again and verifying that it is the correct driver for your network card, normally on the site they will tell you the correct driver for your hardware if you type the model number in.
 
Woody1191 Thank you very much for your help! I have a trendnet wireless PCI adaptor - trendnet tech told me that its apparently not compatible with Windows XP Service Pack 3 yet

I am just waiting now to see if new drivers are available



Thanks again for checking it out - hopefully this turns out
 
Status
Not open for further replies.
Back