DVD burner wont burn

By bg6o4
Mar 9, 2005
Topic Status:
Not open for further replies.
  1. ive been trying to burn a data cd onto a dvd disk and it fails to burn...
    here is the last burn log from nero

    9.3.2005
    ISO compilation
    15:24:04 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:24:04 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    15:24:04 #3 Text 0 File Writer.cpp, Line 124
    Writer RICOH DVD+RW MP5240A running

    15:24:04 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    15:24:05 #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    15:24:05 #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2000671 (444:35.46, 3907MB)

    15:24:05 #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    15:24:05 #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: RICOH DVD+RW MP5240A, Media type: DVD+R

    15:24:05 #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:24:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2000672 (2000672) = #2000672/444:35.47
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2000672 blocks [RICOH DVD+RW MP5240A ]
    --------------------------------------------------------------

    15:24:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [RICOH DVD+RW MP5240A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4097376256, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2000672 | lead-out | 1 | 0x00 | 0x41

    15:24:05 #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    15:24:06 #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    15:24:06 #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    15:24:06 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2.4x (3,324 KB/s)

    15:24:06 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:24:06 #17 SCSI -1066 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032E5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    15:24:06 #18 CDR -1207 File DVDR.cpp, Line 4509
    Book Type automatically set to: DVD-ROM

    15:24:06 #19 Text 0 File DVDR.cpp, Line 5297
    Drive: RICOH DVD+RW MP5240A
    Book Type request: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    15:24:06 #20 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 20:54,367 (1254367ms) -> OK

    15:24:06 #21 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:44:44 #22 Text 0 File WriterStatus.cpp, Line 115
    <RICOH DVD+RW MP5240A > start writing Lead-Out at LBA 2000672 (1E8720h), lenght 0 blocks

    15:44:44 #23 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    15:46:13 #24 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    15:46:14 #25 Text 0 File DVDR.cpp, Line 5297
    Drive: RICOH DVD+RW MP5240A
    Book Type request: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    15:46:14 #26 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    15:46:14 #27 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 2.4x (3,324 KB/s)

    15:46:14 #28 Phase 78 File dlgbrnst.cpp, Line 1855
    Data verification started

    15:46:42 #29 SCSI -1128 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0573F000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x1E 0x87 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x1E 0x87 0x00 0x0C
    0x00 0x00 0x00 0x00 0x11 0x00

    15:46:42 #30 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
    Error during reading the sector: 2000640

    15:46:45 #31 SCSI -1128 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05761000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x11 0x00

    15:46:45 #32 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
    Error during reading the sector: 0

    15:46:47 #33 SCSI -1128 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05761000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x11 0x00

    15:46:47 #34 Text 0 File DriveFileSystemBlockReader.cpp, Line 231
    Error during reading the sector: 0

    15:46:47 #35 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 1287
    Cannot mount the written CD
    "RICOH DVD+RW MP5240A " (H:1, T:0)

    15:46:47 #36 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385
    Status summary
    Total files=0, identical=0, different=0, inaccessible=0, skipped=0.

    15:46:47 #37 Phase 81 File dlgbrnst.cpp, Line 1855
    Data verification failed


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 10:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 28/08/2002 23:27:50 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    ....hope someone can help thx in advance
  2. gamingguy27

    gamingguy27 TechSpot Enthusiast Posts: 253

    Os?

    Some DVD burners require windows xp, but if you have xp try upgrading the drivers/firmware. Also if the cd has copyright on it nero will not burn it!
  3. bg6o4

    bg6o4 Newcomer, in training Topic Starter

    the OS is windows XP pro, it all worked fine before installing service pack 2.
    and since then ive formated thinking that may help... but no luck.
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.