By atticbear
May 24, 2008
  1. i took out cpu

    hi i took my cpu out coz iwas bord it was working ok and ive put new thrmo paste stuff on but my computer shows nothing on screen what have i done wrong ? am i ment 2 leave it a wile before i can use it now ive put new paste on or will it work as soon as i put it on i don't no please help
  2. Tmagic650

    Tmagic650 TS Ambassador Posts: 17,233   +234

    "Help" is not a proper title... Change it to something like "New thermal Paste, No boot". Why did you take your CPU out in the first place?
  3. mailpup

    mailpup TS Special Forces Posts: 6,964   +355

    You really shouldn't use thermal glue but thermal compound instead. You might have a difficult time separating them later. If the CPU wasn't working before, putting on glue won't necessarily bring it back to life.

    But really, your post has so few details I don't know what else to offer.
  4. magaman598

    magaman598 TS Booster Posts: 188


    I've been having this Problem, I got a new Processor Today and when I Turn my Computer on, I don't get a Signal from my NVidia GeForce FX 5900, I have Tested the Card on Various Machine's and it is Working.

    I think the Processor is DOA and such.

    Any Help Guys?

    And where could I get a User Guide in .PDF Form?

    I want to see if I set up my MoBo Correctly.

    Thanks for any Help in Advance!

    My System Spec are:

    MSI K8T Neo-V
    Gainward Nvidia GeFore FX 5900
    AMD Athlon 3200 754 PIN
    Corsair Value Select 1GB (2x512 with Copper Heat Spreaders) 184-PIN DDR 400 RAM
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...