HP power supply problem

Status
Not open for further replies.

chz435646746

Posts: 23   +0
Hi, I am going to upgrade my HP power supply. But I found it's really difficult to find one with the correct dimension. My HP power supply tower has the dimension 150mm(W) 86(H) 140mm(L). Usually power supply depth is 150mm. So is there any PSU with the same size (better to be about 600 watt)?
Thanks very much.
 
my hardware info

Before we go for a 600 watt psu give us your hardware specs.
The following is my computer info:
Manufacturer's motherboard name: H-RS880-uATX HP/Compaq name: Aloe
Form Factor: Micro-ATX: 9.6 in x 9.6 in
Chipset: AMD 785G
Front-side bus speed: 5200MT/s (5.2 GT/s)
Expansion slots: One PCI Express x16 Three PCI Express x1 One PCI Express x1 minicard socket
Internal Connectors: One opt fan connector One cpu fan connector Four DDR3-DIMM socketsOne 24-pin ATX power connector One front panel header Six SATA connectors One clear CMOS jumper One clear password jumper Six USB headers One IEEE-1394 front port One line-in connectorOne front audio connector One PCI-E x16 connector [J3] Three PCI-E x1 connectors One PCI-E Mini-Card connector One PCI-E Mini-Card LED headerOne SPDIF output header One PC fan connector One 4-pin ATX power connector

So you know any appropriate PSU? Thanks very much.
 
Status
Not open for further replies.
Back