TechSpot

Imgburn No Seek Complete Bad Dvd?

By Rab2140
Mar 16, 2008
  1. Hello all, I recieved 2 yellow Datawrite DVD+DL 8.5gb 2.4x 8.5gb dual layer dvd's yesturday and i ran img burn to write files to my disc and everytime i trys to write i get this error:

    [​IMG]

    I press continue and i get this messege :
    [​IMG]

    Here is my dvd drive info that is shown on the right of imgburn:

    SONY DVD RW AW-G170A 1.71 (ATA)
    Current Profile: DVD+R DL

    Disc Information:
    Status: Empty
    Erasable: No
    Free Sectors: 3,827,520
    Free Space: 7,838,760,960 bytes
    Free Time: 850:35:45 (MM:SS:FF)

    DVD±R DL Boundary Information:
    L0 Data Zone Capacity: 1,913,760
    Changeable: No

    Physical Format Information (ADIP):
    Disc ID: CMC MAG-D03-64
    Book Type: DVD+R DL
    Part Version: 1
    Disc Size: 120mm
    Maximum Read Rate: Not Specified
    Number of Layers: 2
    Track Path: Opposite Track Path (OTP)
    Linear Density: 0.293 um/bit
    Track Density: 0.74 um/track
    First Physical Sector of Data Area: 196,608
    Last Physical Sector of Data Area: 16,580,607
    Last Physical Sector in Layer 0: 2,283,519

    Physical Format Information (Last Recorded):
    Disc ID: CMC MAG-D03-64
    Book Type: DVD-ROM
    Part Version: 1
    Disc Size: 120mm
    Maximum Read Rate: Not Specified
    Number of Layers: 2
    Track Path: Opposite Track Path (OTP)
    Linear Density: 0.293 um/bit
    Track Density: 0.74 um/track
    First Physical Sector of Data Area: 196,608
    Last Physical Sector of Data Area: 16,580,607
    Last Physical Sector in Layer 0: 2,283,519

    I have updated my firmware and all that. I would go and say that the discs i got a rubbish but i have burnt with this brand before and they worked, but saying that, the ones i used before were blue, these ones are yellow. but they are exactly the same as far as i can see. i did install a new power supply for my comp a few weeks ago and this is the first time ive tried to burn after doing that i cant see this affecting it.

    I will go buy some verbatim discs see if they work.

    Any help would be greatly appreciated ty :)
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...