OS 7 BSOD help

By adgoff21
Jun 11, 2010
Topic Status:
Not open for further replies.
  1. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    MOBO: ASrock p55 extreme
  2. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    And another

    Attached Files:

  3. Route44

    Route44 TechSpot Ambassador Posts: 12,109   +21

  4. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    and another

    Attached Files:

  5. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    Model #: P55 Extreme
    Item #: N82E16813157172

    I have also started emailing ASRock about compatibility with my memory.

    And another.

    Attached Files:

  6. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    Nothing out of the last 4 or 5?
  7. Route44

    Route44 TechSpot Ambassador Posts: 12,109   +21

    We know computer issues can be very frustrating because we've been there ourselves and continue to have PC issues periodically. But please understand that every one of us are volunteers and we try the best we can and when we can to get to the many posts that come our way on an hourly basis.

    One error is 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
    The Windows kernel detected an illegal or unknown processor instruction. A Stop 0x1E condition can be caused by invalid memory and access violations similar to those that generate Stop 0xA errors.

    It only cited a Windows OS driver. 0xA errors are caused by either hardware or drivers attempting to address higher IRQ Levels than they designed for.

    One error is 0x3B and the dump cited memory corruption.

    The last error is 0x50 and it too cited memory corruption.
  8. Archean

    Archean TechSpot Paladin Posts: 5,994   +67

    Assuming your RAM is also set correctly (timings + voltage) in the BIOS, I suggest that if possible, arrange another RAM Module to replace your existing Modules, and see whether that eliminates these errors.

    Also, can you please give us complete specifications of your system including Graphic Card and PSU brand/wattage etc.
  9. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    I ran windows memory diagnostic tool and it showed a hardware issue, but quit working. I will try to run it again and see if I can get it to complete.
  10. adgoff21

    adgoff21 Newcomer, in training Topic Starter Posts: 23

    Did not find it the next time. Anymore advice?
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.