Power surge on hub port

Status
Not open for further replies.

chipopo

Posts: 56   +0
hi everyone,
these are my Motherboard Properties
Motherboard ID 12/25/2003-i865PE-6A79ZG0GC-00
Motherboard Name Gigabyte GA-8IPE1000(-L) v2.0

Front Side Bus Properties
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 200 MHz (QDR)
Effective Clock 800 MHz
Bandwidth 6400 MB/s

Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Chipset Bus Properties
Bus Type Intel Hub Interface
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s

Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 5 PCI, 1 AGP
RAM Slots 4 DIMM
Integrated Devices Audio
Form Factor ATX
Motherboard Size 230 mm x 300 mm
Motherboard Chipset i865PE
Extra Features CPU Intelligent Accelerator, EasyTune 4

Motherboard Manufacturer
Company Name Gigabyte Technology Co., Ltd.
Product Information http://tw.giga-byte.com/MotherBoard/Products/Products_NewProduct_List.htm
BIOS Download http://tw.giga-byte.com/Motherboard/Support/BIOS/BIOS_List.htm

and it's been a week or so that i'm getting this message:
Power Surge On Hub Port
A USB device has exceeded the power limits of its hub port.
For assistance in solving this problem, click this message.


when i click the message i get another message which i attached to this post.
now, there's no device connected to a usb port on my pc which makes the whole thing ever more weird. also, i don't remember something special that i did prior to this problem.
 
Looks like something is bad then.. Maybe the USB controller or the wiring for the front panel USB connections.

Are you sure you have no actual USB devices? Things like memory card readers are somethimes wired to USB inside the computer.
 
I'm not sure because I don't understand too much about this. Is there a way I can find out? The front usb ports are not connected to the motherboard and they don't work.
 
Status
Not open for further replies.
Back