Random BSODs after reinstalling Windows

[hinick]

I keep getting really random BSOD. I've reformatted and reinstalled windows several times with no luck. Updated drivers etc.

I can't post mini-dump files because they are too big, but email me, and I can send the DropBox links.

Thanks for your help.

Here are my specs from Speccy

Operating System
MS Windows 7 64-bit SP1
CPU
AMD Phenom II X6 1055T 29 °C
Thuban 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. M4A89GTD-PRO/USB3 (AM3) 43 °C
Graphics
E2350 (1920x1080@60Hz)
ATI Radeon HD 5800 Series (ASUStek Computer Inc) 39 °C
Hard Drives
1465GB Seagate ST31500341AS ATA Device (SATA) 34 °C
112GB OCZ OCZ-AGILITY2 3.5 ATA Device (SATA) 30 °C
Optical Drives
HL-DT-ST DVDRAM GH24NS50 ATA Device
Audio
Creative X-Fi Audio Processor (WDM)

 

[Tmagic650]

"I can't post mini-dump files because they are too big, but email me, and I can send the DropBox links"...

Go here:
https://www.techspot.com/vb/topic51365.html

Run the checks on memory and the hard drive, and then zip and attach those minidumps properly. It can be done, no matter how big the minidump files are. The instructions are in the link

 

[hinick]

Yes, I did read those posts and did the disk checks and memory tests with no success.

I've zipped the mini-dump files and attached.

Thank you.

 

[Tmagic650]

Quite a mess here:
PFN_LIST_CORRUPT
Asacpi.sys
Csc.sys
MEMORY MANAGEMENT
BUG_CODE_USB_DRIVER
Usbport.sys
Usbehci.sys
BAD_POOL_HEADER
SYSTEM_SERVICE_EXCEPTION
Unknown Module

Do you have all the Asus motherboard drivers installed. Are you overclocking? Is the bios SATA settings AHCI or RAID and not IDE? Is Windows 7 fully updated using Windows Update? Try raising the memory voltage (VCC) in the bios a notch or two