Referenced Memory Error

Similar problem

ya im getting a similar error but mine only happens when im playing a game called Shadowbane

i get this

sb.exe - Application error

The instruction at "0x027849b6" referenced memory at "0x022a4e44". The memory could not be read.

click on ok to terminate the program
click on cancel to debug the program

but either choice results in a crash

Hello,

I have not every post on here but I would like to explain my problem. I get the memory error on shutdown only. I think it has something to do with anti-virus software. After installing the free trial of Norton on my sisters computer, she got the shutdown error too. It was freakin crazy. And she has never had it before. I have tried the free mcaffee trial as well and got the error still. It has an issue with my wireless internet. And on my sisters computer, it had to do with her service host. It was way too weird to see this happen to two computers not on the same network. After reading through a lot of posts, it seems like virus software is coming up quite a bit...any opinions on what to do? VERY FRUSTRATING.

Thanks.

One more thing to add to my post above.

My sister used to have an older version of Norton that never gave her problems.

I reinstalled Windows on my computer last week and know that I have no viruses on my machine. I have run over 5 different scans and my computer is clean.

Would buying the real version of Norton make a difference than having the free trial version?

It is weird that I also got the error after getting the free version of mcaffe antivirus. Does it have to do with downloading this software and not getting it on a cd? Help!

Hi,

I am still getting this error as well. I unistalled and reinstalled Norton Anitvirus, ran sfc /scannow, ran registry fix software, changed my virtual memory and I am still getting the following two errors:

The instruction at "0x02c61611" referenced memory at "0x02c61611". The memory could not be read.

and

The instruction at "0x02c9f207" referenced memory at "0x02c9f207". The memory could not be read.

I only get these errors when shutting down. And I run Firefox, not IE, although I do have that installed.

Any other thoughts?

Thanks!

Memory could not be read

Hi everyone,

With VB application, once I got the following error but when i cleared the temp files it started working. After I added few more controls again i got the same error. Now the error is coming everytime when i execute the application. But application without the latest update is working fine. Can you guys please help me to rectify it.

The error is :

The instruction at "0x212fa7e2" referrenced at memory "0x00000008". The memory could not be read.

When you guys reply please send me a mail to krishna21e@gmail.com with the subject as "Application Error".

Kindly reply as quickly as possible.

Regards,
Krishna

I am having the same problem, but in a different context. I recently updated my version of Office (using the automatic update) and now my PC is cycling, kind of.
After I updated my OS, the PC recomends that you restart right away. On the shut down button, it says "must click here to install..." Windows starts to shut down, then an error msg pops up saying The instruction at "0x745f2870" referenced memory at "0x00000000" The memory could not be "read". Click OK to terminate, or Cancel to debug.
No matter which one I select, my PC freezes, it just says "downloading update 1 0f 9...PC will turn off on its own" FOREVER! nothing happens! I have to do a hard restart.
When my PC restarts, windows pops up w/ a Generic Host Process for Win32 error message, and asks if I want to send an error report to MS... when I send the error report, it brings up a MS page, and they say "the problem occurs after you start/restart PC.... appears in PCs w/ Win XP SP2 & Security Update 873333 (MS05-012)... click here to download patch"
I have downloaded this "patch" 3 times, and my laptop keeps doing this same cycle!

I searched add remove programs for the Security Update that windows blames, and I found "Windows XP HotFix KB873333" Not the EXACT same, but close enough.
But when I tried to uninstall it, it gave me a warning that I may not be able to use a long list of applications.
I dont have Norton anthing (I hate norton w/ a passion), I do have a trial version of McAfee Internet Security (which I dont really love, but am using cause its free)
I reformated my HD less then a week ago, so I KNOW it has to do w/ Windows, (especially sense they tell me they know its their falt "security update 873333")
I have 1.5gb of DDR2 Ram, so it couldnt be that Im running out of virtual memory.
The only other thing it could be (other then XP) is Office 07. I recently installed Office 07, a legall version, but I didnt have any problems w/ it untill I updated my OS.
Any advice would be greatly appreciated!

Hi - this is my very first post on this site. I got registered today only.

I am tired with this "Memory read/write error" with IE. Microsoft is not providing much help. Can anyone please dig deep into the issue and help me (rather all of us) to get rid of this issue?

Thanks.

Ajay Patel.

As this thread has been in existance since 2004, it would seem to be baffling more gurus than you can shake a stick at, judging by this and the innumerable other forums.
My problem just surfaced last night when I downloaded Microsoft updates. Never had the problem before!
I was using IE7.0
When I went to shut down I got a message saying the downloads would be installed and the machine would shut down automatically. When I went to the machine this morning it was still running with an error message on it and only some of the downloads installed.
Which seems to point squarely at Microsoft!
I wouldn't say my machine was running perfectly before but it was as acceptable as you could expect from a MS Operating System

please help

i come with no solutions only problems...0x03564156 referenced memory at 0x00000000 i click ok because if i try to debug it freezes. i have been aving this prblem with my SD card that i put into my toshiba laptop. it read the images from my camera fine but when i try to use it with my camcorder it doesnt work. it lets me get into the SD folders and i am able to click in the folder containing my videos but before i can get to them this error shows. if anyone has any solutions i will be greatful. thanks.

Please make your own threads. Sheesh.

Referenced memory error in windows explorer

Hi all,

I am new to this forum and I have a really annoying problem with my laptop.

It is not as serious as some posts on this thread but it is beginning to do my head in.

The problem first started occuring when I set up file sharing across a wireless network.


I keep getting the following error when either trying to rename or delete a folder in my documents or My computer programs directory and it is completely repeatable.

Explorer.exe - App error
The instruction at 0x0xxxxxxx referenced memory at 0x00000000
The memory could not be written.
Click Ok to terminate the program
Click cancel to debug this program

The 0x0xxxxxxx differs on each error.

At first windows explorer just used to hang and and dr watson would come up with the usual send/dont send a report to microsoft, not exactly very helpful.

So to get more info I used regedit to set AeDebug auto value to 0,
and now I get the above error.

I have found a workaround by creating a folder named My docs2 on the desktop I am able to copy the contents of My documents to it and I am then able to rename/delete files in this new folder without causing any errors.

But I still can't rename or delete folders in my documents without causing windows explorer to stop responding.

Creating folders in My documents does not cause this error just trying to rename or delete them hence I now have several empty folders called new folder, new folder(2), new folder (3) etc etc in my documents.

The Important stuff
OS Windows XP Home Edition Sp2
Celeron M 1.70ghz
60 Gb hdd
512 mb ram

I have now stopped sharing all my folders on my laptop but the problem still exists.

I've also run memtest with no errors.




Any ideas anyone on how to resolve this??

SymWSC.exe

The instruction at 0x00000000 refrenced memory at 0x00000000. The memory could not be "read".

Any1 help?

starts when starting up windows user accounts.

cheers 4 helping- James

Members should start a new thread for their problems, in our Windows OS forum, rather than posting in someone elses thread. Otherwise it gets really confusing.

Thread closed.

Regards Howard