Setting up FTP server with NO-IP, BulletProof Server and SmartFTP

Status
Not open for further replies.
Hello i want some help about setting up my ftp server. First of all i've already installed all useful programms (NO-IP, BulletProof server and SmartFTP) and i've made 2 accounts for them (NO-IP, BulletProof server). The problem is when im going to connect with the server from SmartFTP the connection always fails. i put normaly the host name and the username-password in SmartFTP that i took from NO-IP. I think that something going wrong with the BulletProof Server. if anyone knows how i can fix it i would apreciate to help me soon. thank you!!!!!
 
Telnet and FTP are security risks, but I'll defer that for now.

look at all the routing info
Code:
your isp gateway (some public ip address)
         |
         + the ISP assigned public address of your modem/router
         |
         + the router's LAN address
         |
         + your system's LAN address
access to your system (regardless of which specific service)
requires
  1. your public modem/router address
  2. a port forward to the system's LAN address
  3. your system's firewall to allow incoming traffic on the required port
  4. and usually an ID+Password to login
the ISP assigned public address of your modem/router is not associated with any DNS,
so you can not be accessed by NAME unless you register with DynDNS.org

SO --- how much of that have you completed?
 
Status
Not open for further replies.
Back