So many errors and bsods and memtest errors

[Onkyo]

Ok when I run the 2 sticks of memory in my board memtest shuts down before it can even get to 1% if I run them single they are fine.

got latest drivers and bios

ok I forgot to add my buddy told me my PSU would be fine it is a antec tru power 550w

I am running corsair dominator 2 x 2g cm2x2048-8500c5d
motherboard is Asus m4a79 Deluxe
evga xt275 896mb video card

now when I use cpu-id it says max bandiwdth at pc2-6400 ( 400 mhz) I think that program may not be reading it right not sure because I read I can run these sticks at 1066 if I just up volt to 2.1v .

any idea what could be the problem ?

this is from event viewer

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/18/2009
Time: 12:01:24 AM
User: N/A
Computer: HAWAII
Description:
Error code 1000008e, parameter1 c0000005, parameter2 804d6e06, parameter3 b5730ba0, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 30 34 64 36 65 30 36 804d6e06
0040: 2c 20 62 35 37 33 30 62 , b5730b
0048: 61 30 2c 20 30 30 30 30 a0, 0000
0050: 30 30 30 30 0000

 

[Route44]

Try running it with one stick of memory. Do you get BSODs? Asus boards are quite well known about their pickiness about what RAN is used per board, the amount installed, and how it is configured.

 

[Onkyo]

yes i have ran it with one stick and no errors. i have read from many sites and forums that people are running this exact setup except psu and they are not having issues. i just wish i i could run memtest to find out but it wont even get to 1%

 

[Route44]

Okay, try running memtest one stick at a time. What are the results?