TechSpot

Sound Activated Cold Cathode Lights

By BAW
Jul 29, 2008
Topic Status:
Not open for further replies.
  1. Well I have had what I thought to be just a light in my loft the other day and it wasn't until I looked at it I thought it must be more than just a light!

    So guess what? I plugged it in! :)
    I then researched it slightly more to find that it must be a Sound Activated Cold Cathode Light!

    BUT, here comes the problem! I dont get the Sound Activated bit! I mean it will stay on, then there is the sound setting which when i switch it to the light goes off! Now I guess you need to plug something from the sound card, normally where your speakers would go, into the "In" labelled jack port and the speackers into the "Out" jack?

    Am I right? Because if so I need to buy a jack to jack lead or is there a way around it?

    Thanks
    BAW
     
  2. THNDR143

    THNDR143 TS Rookie Posts: 58

    yup

    You need a Cable to connect it to the PC output.
     
  3. BAW

    BAW TS Rookie Topic Starter Posts: 25

    Thought so after hours of firguring it out LOL :)
    Thanks
     
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.