Windows 7 Home Premium 32-bit BSOD

Hi all,

I have just recently gotten this BSOD after i upgraded my Vista Home Premium 32-bit to Windows 7 Home Premium 32-bit.

Whenever i try to run a game application, specifically MapleStory, it always gave me a BSOD.

I tried adding exceptions into DEP, tried running in different compatibility modes with admin priviledges, reinstalling my Graphic and Sound driver to the latest updates



problem details are as follows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 18441

Additional information about the problem:
BCCode: 1000008e
BCP1: C000001D
BCP2: 82E4C327
BCP3: A4C07CC0
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\110709-30841-01.dmp

attached below are 2 most recent dump files.

Both errors are 0x8E and these are almost always caused by hardware though sometimes they can be caused by drivers. This error is also a strong indicator of corrupted memory.

Unfortunantly the minidumps only cited Windows OS drivers as the probable cause and they are usually too general to be of much help.

I would say that with your gaming issue it is a good bet your video card drivers need to be updated. When you updated your drivers did you use something like Driver Sweeper to make sure the old drivers were completely removed before installing the new ones?

Also, because of the error codes it would pay you to test your memory for corruption.

See the link below and follow the instructions. There is a newer version than is listed but either one should work. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


Link: http://www.techspot.com/vb/topic62524.html


* Get back to us with the results.