also @ TechSpot: Nortel's internal network "owned" by hackers for almost a decade
Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Sign up or Login to participate.

Go Back   TechSpot OpenBoards > Hardware > Overclocking, Cooling and Modding

Begin your free trial now Pay-as-you-go options starting at $10/user/month

Placing 88xx card in an oven. Radical much?

Thread Tools Search this Thread
  #1  
Old 07-28-2009
Xecutor's Avatar
TechSpot Member
 
Location: Canada
Member since: Sep 2008, 141 posts
System specs
Placing 88xx card in an oven. Radical much?

Here is a comment I found posted by some random poster on NCIX.com while trying to read up about GTX260 v GTX275 v GTX280. Amazing and scary. I am tempted to try this on my almost dead 8800GTS. What do you guys think?

Here is the link:
http://forums.ncix.com/forums/index....d=0#msg2019158


*************************************************
And for those who find it too tedious, voilą:

Rick_L
Rating: 12 | Rated by 1 Visitors Jul 20, 2009 11:21 AM Reply | Bookmark
Top | Bottom

Hehehe proof of what I mentioned in another thread.
You can get the 8800GTX working again.
Either RMA it (if you are lucky enough to have a lifetime warranty) or...
Preheat an oven to 390F.
While the oven is preheating roll up some aluminum balls using aluminum paper. Grab a baking sheet and your 8800GTX. Remove the cooler off the 8800GTX and Flip the 8800GTX upside down so that the GPU is facing the baking sheet and use the aluminum balls so that the card does not make contact with the baking sheet (or the plastic will melt).
Place the backing sheet with the aluminum balls and 8800GTX into the oven. Leave in there for 8-10mins.
Remove the card, re-install the cooler and install the card into your computer. Voila it should now work.
The issue is a defect in nVIDIA cards. ANY nVIDIA card 88xx or newer will eventually fail. The constant heating and cooling of the cards causes it's solder contacts to fail and crack. Most people who have noticed this issue are those with higher end models (GTX 280 is plagued with this). Placing the card in the oven will fix it (more often then not) by re-fusing the solder contacts).
Good luck.
See how it's done here with pictures: http://www.hardforum.com/showthread.php?t=1421792
A Youtube Video of the process as well: http://www.youtube.com/watch?v=R7jUqoKVY-k
This message was modified by the poster at 07 20, 2009 11:24 AM
This message was modified by the poster at 07 20, 2009 11:27 AM

This message was modified by the poster at 07 20, 2009 11:30 AM
Rate Posting | Tip Posting | My Postings (12) | My Reviews (15) | View Source | Mod
  #2  
Old 07-28-2009
vegasgmc's Avatar
TechSpot Chancellor
 
Location: Las Vegas
Member since: Mar 2002, 1,743 posts
Ive read several articles covering that. They all agreed it helped. If your card is dying its worth a try.
  #3  
Old 07-28-2009
TBolt's Avatar
TechSpot Member
 
Location: Utah, USA
Member since: Nov 2005, 66 posts
System specs
Wow...that's awesomely nuts. In concept, it sounds good. Executor, since you indicated your card is about to take a dump, mind being a guinea pig and testing this out for us? Of course don't do it if you can return/replace it at little to no cost.

With my luck, my card would turn into a crispy curly lump of smoldering poo (my oven is...finicky).
  #4  
Old 07-28-2009
snowchick7669's Avatar
TechSpot Addict
 
Location: New Zealand
Member since: May 2009, 696 posts
System specs
And here I was thinking the oven was for baking/grilling food.

Boy was I wrong
  #5  
Old 07-28-2009
Xecutor's Avatar
TechSpot Member
 
Location: Canada
Member since: Sep 2008, 141 posts
System specs
LMAO!!

I will give it a try actually, but it will have to be over the next few days. I have some home admin to do first... fun!
Closed Thread

Similar Topics
Topic Replies Forum
I am looking for microwave oven 5 Hot Deals
Permanently placing files onto a USB key 5 Other Hardware
My oven door blew up! 32 General Discussion
Totally radical case cooling idea! 7 Overclocking, Cooling and Modding

Thread Tools Search this Thread
Search this Thread:

Advanced Search
All times are GMT -4. The time now is 03:04 PM.