I have a BSOD problem.My system is Gigabyte EP35C-Ds3R x86 based,Quad 6600 2.4 chip,and unfortunatelly 2x2 4gb of Crucial Ballistix BL15664AA80A 16FE5 memory sticks.The memory is suspect as i'm testing the sticks one at a time.I have 4 slots for dual channel,memory86 testing with 7 passes didn't reveal anything,no errors.Usually when the BSOD starts I read the dump and usually exchange the memory since it's free.I'm trying to make sure this is the same scenario since I had a IMAGE_NAME: win32k.sys in the dump.I just reinstalled XP pro with a new hard drive,am doing the TechSpot 8 steps procedure,after which I'll do the rest of the procedure from mflynn at .Any help would be appreciated and thanks in advance.

This is only my second post so for attachments i need to post a few more time.

Actually this is the last dump:


Loading Kernel Symbols
...............................................................
................................................................
......
Loading User Symbols
Loading unloaded module list
..........
*************************************************************************** ****
* *
* Bugcheck Analysis *
* *
*************************************************************************** ****

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ee27c0bc, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 80505f17, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000002, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: ee27c0bc

FAULTING_IP:
nt!MiLocateAndReserveWsle+51
80505f17 8b0c81 mov ecx,dword ptr [ecx+eax*4]

MM_INTERNAL_CODE: 2

CUSTOMER_CRASH_COUNT: 3

DEFAULT_BUCKET_ID: DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: explorer.exe

TRAP_FRAME: 9beeb438 -- (.trap 0xffffffff9beeb438)
.trap 0xffffffff9beeb438
ErrCode = 00000002
eax=00ffffff ebx=0000041b ecx=00000310 edx=0000060b esi=bca80008 edi=bd069000
eip=805462d0 esp=9beeb4ac ebp=9beeb4e0 iopl=0 nv up ei pl nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010202
nt!RtlFillMemoryUlong+0x10:
805462d0 f3ab rep stos dword ptr es:[edi]
.trap
Resetting default scope

LAST_CONTROL_TRANSFER: from 80513ace to 80505f17

Sorry for the redundant stuff but am building the 5 post minimum.

I'm trying to use HJtInstall to get a log.

OK here are the minidumps.

Attached Files

	debuglog11-15-09.txt (16.3 KB, 1 views)
	debuglog11-15-09B.txt (18.3 KB, 0 views)