Intel Motherboard

H

hdinesh17

hi

When we disconnect p4 connector(12v) mother board power on but when
p4 connector is connected (12v) mbd dose not power on.
checked smps voltages are good but problem at mbd end..pls give me some
tips to rectify the problem

Rgds
Dinesh H
 
Is the motherboard still covered by warranty?
It sounds like you may need to use it. If the power supply tests ok then probably the only way to fix it would be to track down the faulty power trace on the motherboard-this is not something you could undertake most likely- I'm assuming there's a short somewhere as the 4/8 pin is usually responsible for supplying power to the PCI lanes.
 
In terms of pure power they're almost catching up to Server/Workstation boards But they don't have the features of i7/i9's.Also, generally only 1 x16 PCIe on such boards, but MASSIVE RAID and RAM arrays.
 

Similar threads

Daniel Sims
Intel and AMD may be testing 12V-2x6 power cables for future GPUs
Replies
15
Views
821
godrilla
godrilla
gubarrr
New build PC - seems to run mostly very well - but not shutting down cleanly
Replies
2
Views
1K
theupsstorelosan
T
zohaibahd
Motherboard makers must implement new Intel power spec defaults by May 31
Replies
3
Views
771
daffy duck
D

Latest posts

Back