broadband router

linso · Aug 15, 2004

I bought a broadband router xdsl/cable modenm, Ive tryed to set an other pc up and cant I got told all i do is plug in and thats it but not for me. if anyone could help me set this up i would be grateful. linso new user plz help

poertner_1274 · Aug 15, 2004

First of all,
:wave: :wave:Welcome to TechSpot:wave: :wave:

Secondly, what type of router did you buy? Maybe we can find you a picture guide or something related directly to your router. Also try unplugging your cable from the modem, as well as the power from the modem, then plug them both back in and see what happens.

StormBringer · Aug 15, 2004

you might want to give some details of the exact issue you have run into with setting up the network/accessing the internet. make and model of router and cards might be helpful, as well as the name of your ISP(SBC, Comcast, etc...) also the OS(along with service pack) used on the machines that will be used.

linso · Aug 15, 2004

Thanks for the replys my router is a st lab i phoned my cable company they helpped me set it up but ive got the one in my livingroom working but not the bedroom

RealBlackStuff · Aug 16, 2004

A few basic setups when networking:

Router-setup WAN:
Protocol: Fixed IP
IP-address, Subnetmask and default Gateway: as per ISP-information
DNS-servers: as per ISP-information
Enable NAT

Router-setup LAN:
IP-address: set to e.g. 192.168.1.254 (or use default)
Subnetmask: 255.255.255.0
DHCP-server: disable

Router: Some System-settings (depending on your router)
Optional SNTP (time): e.g. 194.35.252.7 for UK/Ireland (GMT)
uPnP: disable
Dynamic routing: disable
Remote config: disable
Dynamic DNS: disable
Firewall: Block hacker attack: enable
Firewall: Block WAN request: enable
VPN: disable all settings unless you need it

PC-Settings
Internet Protocol (TCP/IP)
Use the following IP address: 192.168.1.101 (102, 103 etc.)
Subnetmask: 255.255.255.0
Default Gateway: 192.168.1.254 (IP-address from your Router)
Use DNS Server address: 192.168.1.254 (IP-address from your Router)
Second DNS: leave blank or put in first DNS-server from WAN-part in Router

Enable File/Printer sharing if you wish (works only within local network)
Check individual printer(s) that they are shared as well (in printer-settings)

And make sure all your PCs are in the same WORKGROUP.

If software firewall installed, enable the other PCs IP-address(es)

broadband router

linso

poertner_1274

Posts: 3,874 +3

StormBringer

Posts: 2,218 +0

linso

RealBlackStuff

Posts: 6,450 +3

Similar threads

Latest posts