Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Login to participate.

Go Back   TechSpot OpenBoards > Hardware & Tweaking > Overclocking, Cooling and Modding

Wanting to overclock my cyrix

Reply
Bookmark / Share this page
Thread Tools
  #1  
Old 01-29-2005
Newcomer, in training
 
Member since: Jan 2005, 7 posts
Wanting to overclock my cyrix

I want to overclock my cryix 233mhz M-II. I found my motherboard is a pcchips M571. The jumper settings for this mobo are here:
http://m571.com/m571/jumpers.htm

I cannot reach the external clock settings jumpers, so I wanted to tweak the multiplier, however, no matter what settings I try, I can never go beyond 3.5 (which is what the factory settings were). My bios doesnt include clock speed or multiplier, is there any program I can use, or maybe a bios I can download and flash into my bios chip to tweak the settings? I tried softfsb but I am not sure where m571 is, i dont think it supports it.
Any help would be appriciated.

I only want to overclock it slightly.
Reply With Quote
  #2  
Old 01-29-2005
Soul Harvester's Avatar
TechSpot Elite
 
Location: Oregon, USA
Member since: Apr 2002, 1,335 posts
System specs
early cyrix chips (anything before the c3, at which point via had bought cyrix) are very poor overclock candidates. They are very hot, use high voltage, and become unstable much quicker.

Also, many of the latter end cpus had a max multiplier lock so that you could never reach above what the chip was supposed to be at. If you really do want to OC it for a hobby and have the tools needed, my suggestion would be to get a super 7 motherboard (one that supports 100mhz FSB) and and a decent cooler. Remember, the majority of Socket A (athlon) coolers will fit on socket 5/7/370 as well, provided you get a single-clip rather then a double or triple clip heatsin. Volcano 6s work great.

Set that puppy to 100mhz FSB and a 2.5x multiplier to start, perhaps a 3.0 if you are lucky. A 300mhz m2 would be VERY hot but may perform decently.
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
  #3  
Old 01-29-2005
Newcomer, in training
 
Member since: Jan 2005, 7 posts
cyrix out intel in

I took my cyrix 233mhz out and put my pentium 200mhz in. I read that a pentium 200mhz will outperform a cyrix in some operations. Said lots of complicated stuff, but among some things it said that the cyrix MMX isnt optimized or used right, and could go slower than a pentium...
I left my fsb at 3.5x and my clock at 66.8mhz so my pentium is overclocked at 233 mhz, 33 mhz shouldnt be too much of a problem. I have a good fan and heat sink. I set the voltage for normal for a pentium 200mhz.
Reply With Quote
  #4  
Old 01-31-2005
zephead's Avatar
TechSpot Paladin
 
Location: Illinois, USA
Member since: Dec 2004, 2,476 posts
System specs
them cyrix's were pretty bad, i wouldn't try it. i had for the longest time a pentium MMX-166 and overclocked to outrageous speeds and it ran like a watch.
Reply With Quote
Reply
Thread Tools

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Radeon 9500 Pro: To overclock or not to? Per Hansson Old Frontpage News & Comments 8 01-25-2005 04:01 PM
Athlon 2500+ overclock DonNagual Overclocking, Cooling and Modding 20 12-16-2004 03:25 PM
Would it be SAFE and RECOMMENDED to Overclock my current CPU? franklogus Overclocking, Cooling and Modding 8 11-11-2004 03:19 PM
Help to my FIRST OVERCLOCK, Please ! franklogus Overclocking, Cooling and Modding 11 08-06-2004 04:48 PM
AMD buys Cyrix Media-GX Division from VIA Julio Old Frontpage News & Comments 0 08-06-2003 04:51 PM


All times are GMT -4. The time now is 11:22 AM.