R
RMR
I can get the CPU to work but it seems to run at half speed. I changed the jumper. Updated the Bios to 1008. changed the Bios to 200Mzh. Need some help please.
Problems installing Athlon XP 3200+ to a Asus A7N8X rev 1.04 motherboard.
kol_indian
Posts: 215 +0
hello and welcome to techspot :wave: :wave:
u have not mentioned what clock speed it is running now please do mention that
u have not mentioned what clock speed it is running now please do mention that
Charles Hammond
Posts: 57 +0
Not all revision 1 worked at 400 Mhz.
I think there was a jumper for 400 Mhz on some of these.
I think there was a jumper for 400 Mhz on some of these.
R
RMR
Fist of all this is a A7N8X rev 1.04 not a deluxe just a A7N8X rev 1.04. heh just to make that clear. Now I set the jumper to 200Mhz i belive is what it sets to. Its on Pin 2 and 3. In the my computer properties its says that its running at 1.10Ghz half of what is should i belive.
Thanks for the help.
Thanks for the help.
JimShady23
Posts: 360 +4
Try Setting it manually in the bios
Check in your bios and see if there is a setting to bump the fsb to 200 mhz. If it only goes to 166 then your SOL no matter what the jumper says.
Check in your bios and see if there is a setting to bump the fsb to 200 mhz. If it only goes to 166 then your SOL no matter what the jumper says.
Similar threads
