Hello..
I’m new in here..
I have several problems in my pc.. I got many BSOD’s, never the same and never in the same time..

I have a:
AMD 3800+
Asus A8N SLI SE
Asus 6800GT
Philips 190s6
I have 1Gb, kingston..
I have formatted my disk 7/8 times..
And i change my psu to a LC POWER 550W DUAL RAIL 24P REV2 PCIe

I've run memtest and passed..
I got many BSOD's, one's i don't have a file, others refers to nv4_disp.dll, others to win32k.sys, ones are page fault, others irql..
This problem have started 6 mouths ago..

I install the all drivers of my mobo and graphics drivers..
What should I do? Help me please


P.S.: I’m Portuguese, sorry about the mistakes..

Attached Files

	Mini110906-01.dmp (88.0 KB, 7 views)
	Mini111006-01.dmp (88.0 KB, 3 views)

Anyone can help me?

Random restarts/reboots/resets/crashes/freezes could be due to several reasons, including overheating, RAM, hardware issues, etc., just do the following and post back with the info so that we can narrow it down some.

Try rebooting(restarting) in safe mode, then go to control panel/ system / advanced Tab/ startup and recovery box/ settings button/ sytem failure and uncheck "restart on system failure" ( take the check out of automatically restart box ) , and check the Write a system event, and the Admin alert boxes (check "send admin alert"). This will force a BSOD on the next crash (freezes/restarts = crashing) that posts the Stop Error Code. On the next crash write down the exact Stop Error Code and post that exact error here back on this thread. (While you're waiting for a reply, you can put that error code in Google search, and in the MS Support Knowledge Base (KB) = to check it out.-
http://support.microsoft.com/search/?adv=1 ).


Also go to your device manager (devmgmt.msc) and check the properties and look for anything suspicious and check that the settings are where they should be.

Check:
1. Overheating(Open the case and check to see how much dust has collected inside it, and if there is alot of dust get a can of compressed air and blow the dust out and clean out all dust bunnies, etc. on the heatsink/;fan combo,etc.; and be sure all the fans are spinning and properly functioning ). Install diagonstic tools like MotherboardMonitor= http://mbm.livewiredev.com or Everest = http://www.majorgeeks.com/download4181.html , and check the tempurature.

2. Poor power supply (weak power supply or noisey / dirty electricity). If possible, swap the RAM and Power Supply (PSU) around with another computer.

3. Bad driver or drivers not updated, or a device conflict. Pull the connectors and push them back on. Reseat all of the cards. RightClick - my comp/properties/select the hardware tab/click device manager/see if there are any "!" next to anything. Try updating the drivers from the manufacturers' websites.


4. Not enough memory or bad Ram. You might need to add more Ram. Missmatched ram or a bad stick of ram will cause this also. Try reseating and or swaping the ram sticks. Make sure they are seated/snaped in firmly.
Run Memtest86: = http://www.memtest.org
and
FREE RAM Diagnostic Tool. - CST Inc.s DOS based DocMemory = http://bucarotechelp.com/computers/default.asp .


5. Could be IRQ conflict

6. Perhaps the CMOS battery on the motherboard is going bad and needs to be replaced. Check it to be sure.
Also check your pc clock's time and day, to be sure it is set correctly.

7. Hard drive could be failing.

8 Right click desktop/properties/screen saver/Power/Hibernate tab ,and make sure hibernation is not enabled, and cleann out your Cache & Cookies & Temporary Internet Files and Folder: = http://www.coloarts.state.co.us/cleanFiles.asp[/L]

9. Make sure you have updated all programs and hadrdware.

10. Motheboard short (loose screw, misplaced mounting standoff , etc.?)

Hi,

One minidump is crashed with 7F and exception code d. This is the sign of the faulty ram.
Mini110906-01.dmp BugCheck 1000007F, {d, 0, 0, 0}

Another mindump is crashed bugcheck C2 and it is also the symptom of faulty ram.
Mini111006-01.dmp BugCheck C2, {7, cd4, 86100740, 84d7f3e0}

Pull over memory module one by one and diagnostic which memory module is bad. Some faulty ram can pass memtest.

I've already do that cpc2004.. And in the two times BSOD's appear's.. But i will do again to have sure.. I'll post anything after..
Thank's for the help.. (and sorry about the PM's cpc2004)

BSOD with the two memory's.. I have the BSOD's when: turn off and next when i turn on - BSOD, when windows is starting..
What to do?

Hi AFCB,

I don't understand what you mean. Can you explain more clearly?

Sorry.. I'm portuguese..
I have tried with one memory separated and i got BSOD in the two times.. I have the BSOD's when i turn on my computer.. On the windows start..

Replace the ram.

How can the two memory's are "broken"?
Are you sure if i change the memory's i'll have the computer fix?
Thank's for all your help..

Hi,

>>>
I have tried with one memory separated and i got BSOD in the two times.
>>>

I assume that you try memory module A alone, it crashed. You try memory module B alone, it also crashed. Hence both both memory module are bad. Try downclocking the ram.

Ok..
I'll do that..
I write something when i have a BSOD or in one week..
Thank's

I've downclock the memory, without success.. You recommend me to buy a new memory?

Hi,

You only attach 2 minidumps and the crashes are related to faulty memory. As you know, the fautly memory may be ram, video memory or L2 cache memory of the CPU. According to my experince, most of the faulty memoy are related to RAM. Attach 4 to 5 minidumps here if you want me to confirm it is ram problem.

One more..

Attached Files

Mini111606-01.dmp (88.0 KB, 4 views)

Hi AFCB,

One minidump is insufficient to confirm your problem. This forum accepts zip files and the size limit is 100K. Can you zip 5 to 6 minidumps?

I can if i have it.. I formatted the computer, so i don't have minidumps.. When i have suficcient i'll post..
Thank's and sorry about the language

So far no more BSOD's.. But i have a question.. The errors "send error report" might be relation with the BSOD's? Now i have many..

So far 2 BSOD's..
Can you analyse, please?

Attached Files

Minidump.zip (28.7 KB, 1 views)

Hi,

Two minidumps are crashed at nVidia Display Card Driver. It may be caused by faulty ram or software error of nVidia Display Card.

Mini111606-01.dmp BugCheck 10000050, {89000004, 1, bfb54fc5, 0}
Owning Process 862237a8 Image: FEARXP.exe
Probably caused by : nv4_disp.dll ( nv4_disp+141fc5 )

Mini111906-01.dmp BugCheck 10000050, {e7e83b84, 0, bfac2f81, 2}
Owning Process 853f4a70 Image: Condemned.exe
Probably caused by : nv4_disp.dll ( nv4_disp+aff81 )