yeam man lower temps and voltages with the same performance, sounds good to me

i dunno what make and stuff my heatsink and fan are but they came with the pc, but they're not by amd i don't think. just some random aluminium h/sink and a 60mm fan that goes at 5000rpm :eek:
i used to have an amd athlon 1.33ghz so it might be what coems with that

my mobo's old enough to still be socket a haha, i do have a desktop pc but the cpu fits and is supported so it's all good

CPU: AMD Athlon 64 3800+ (Venice, 2.4GHz stock)

Multipliers:CPU Multiplier locked, HTT free but unused.
FSB: +17MHz (Total 217)

Final Op. Freq: 2.618GHz
Temp: 36C

Please do read the first post on what information to add, and also the correct way to post it. Your post does not have all the information required, and so has not been added to the list.

Thanks for posting, but please add the necessary information.

Sorry, CMH.

Just a little update on my temps since I have a new CPU cooler.

A64_3000+@2,6Ghz/Zalman CNPS9500/stock(1.4V)/31C/42C

I guess you could add 10C to my CPU temperatures as well - it's around 40C idle and 80C load now.

amd 2400+, no overclock, idle 48C, full load 55C, case temp 18C

Celeron 3.20

42C/34cpu

I'm sorry I cannot add the last 2 replies because of the lack of information.

Not to mention the wrong format.

I don't really want to assume that you're using stock components unless you specifically said so. Same goes for the voltages and speeds. There is no need to specify these if you haven't changed them, just mention "stock".

remember, format is:
CPU@speed/Cooler/Volts/idle_temp/load_temp - Your_name

intel p4

four case fans

47-55 C

all are stock

hello again, CMH

i don't know why so many replies are just so wrong (format etc) but obviously not everyone on techspot owns as much as us haha

and the other guys who got it right, of course

amd 2400+@2.0ghz,Zalman-CNPS7000B-Cu LED,stock,48C,55C

sorry for my last post

Yeah... well it's a minor update. Both temps have dropped 3C because I actually cleaned the heatsink of dust. So its now,

A64 X2 3800+@2.16Ghz/Stock/Stock/34C/46C - Nick Lee

E6600 at 3.46GHz / Tuniq Tower / 1.48 Vcore / ? / 70

I think when it was at idle it was 39c with the mobo sensor (Tcase) that reads 56c now that the core is ~70. It's alway at 100% load.

i've just fitted my pc with a zalman 7000B al-cu so now my details etc are Athlon XP-M 2600+@2GHz/Zalman CNPS 7000B Al-Cu/Stock(1.56V)/34/38 which is a lot better than before

I see my old temps posted, I remember when we initially did this post. I want to note that the freezone was halfway to max. Also I took temps of speedfan with my freezone on hi, pic is in my galery, been up for months actually. Ambient room temp of 60F http://www.techspot.com/gallery/show.../ppuser/121436

'Ambient room temp of 60F' - jeepers - that is one cold room.

I downloaded CoreTemp, and after the furst time I ran the program the computer restarted. Now when I try to run it, I get an error that says the processor is not an Intel Product. It is a Pentium D. Any thoughts?

Sorry, I've not ben updating. I'm still not going to update yet, I'm currently on holiday, and the net access I've got is really bad. Keep posting your temps, and I'll update in a couple of days.

Maybe I'll post some pics of my hols

E6320@2.8GHz/Stock/1.35V/31C/55C