Your CPU temps

AMD Athlon 64 X2 6000+ (stock) @ 3000.25mhz /1.35v / 21C / 49 C

Thermaltake TR2 - r1 heatsink with a fan swap for a 92mm Thermaltake 3 in 1 smart fan in an NZXT Tempest case Cool & Quiet enabled. Changed all the 120mm case fans to the 120mm Thermaltake smart case fans all running through a Nexus 4 channel controller,

AMD 3200+, Half Multiplier (5x) 26c, under full load, and full 10x multiplier it maxes at 38c. I'm using the stock AMD heat sink and fan, with some arctic silver 2 compound.

New system same cooler.
Q6600@3.0/Tt BlueOrb/1.20v/37c/57c

Case fans make a very big difference with this CPU cooler, if I set all my fans to be almost silent temps can increase as much as 10c degrees.

E8400 SLB9J @ 4.005 (445x9) VCore 1.24v 25C at idle 30C at 100% Core temps 39C idle 44C at 100%

Thermalright Ultra120 eXtreme Sunon 120x @ 98CFM

ASUS P5Q 4GB (4X1GB) Geil Black Dragon PC2 1066 @ 1116MHz

I don't have heat in my house so the ambient temp right now is 16C and CPU temp is 16C. At least it is if this sensor is reading right. The heat sink is cold to the touch, so maybe it is.

core i7 920 @ 4.4Ghz(210x21 turbo mode) Water Cooled / 1.45volts/ 32C/59C

Dang Bra, you're at 4.4 with that? That's sweet.

Intel dual core E8400@3GHz/CNPS9500/1.3625V/44c

Phoenix, why is your V Core so high? My E8400 runs at 4 GHz at 1.225v

Every temp monitor i use gives me a diffrent core, cpu, system temp... I dont know which is which!!! Any one help tell me what my cpu temp actually is from this screenshot?

http://img6.imageshack.us/img6/7728/tempsg.jpg

Thanks

Not from that screenshot. The only one I'd trust is core temp and the exclamation marks makes me think it doesn't like the sensor. Aside from speed fan the other two don't show CPU temps. PCB and system temps are the same and shows a close enough reading to lead one to be accurate. I don't understand why a quad core is only showing one core temp on core temp. try downloading Everest and see what it shows. There's no way the cpu temp is gonna be 35 and the core temp 24. The core temp should be a few degrees hotter at idle.

Hello
I’m worried about my CPU temperature. My CPU is Intel Core 2 Duo E6750 temperature about 40-50° C. is that normal? I clean my fan and add thermal pasta, but it nothing... maybe it should be like that. I don’t know.

p.s. sorry, my English is poor.

I would guess that it's about right if your using a stock heatsink/fan.

AMD Athlon 64 x2 4400+ 2.3GHz (AM2 cpu)
TR2-R1 Thermaltake CPU fan, stock Heatsink
Stock voltage; soft OC (setFSB) to 2.6GHz

temps - Idle: 27deg C ; Load: 50deg C

Just realised I haven't updated this thread for sometime, will update tmr, since there's quite a few posts to comb through.

Im on my notebook, running AMD Neo x2 Temps are 20/15 C

Okay, they've been updated.

If your temps aren't in here, please post in the required format. I will update the temps on the first page if someone else will compile all those who didn't put it in the format, to the required format, at any page (especially if they tell me that they've done so).

The format, as copied from the first page:

I do realise that coretemp and prime95 may be outdated, but given that this list isn't standardized in any other way (other than posting format), and that it is just as a rough guide anyway, use ANY temperature sensor and CPU stressing program you like. Not like we checked to make sure you did....

One more thing, there is a maximum character per post, so I'll mention that when that happens, I'll move "outdated" CPUs to my next post in this thread (I will of course link it, and make a mention in the first post).

New system
i7 920@4.0/Noctua NH-U12P/1.305v/47c/77c - Adhmuz

good work on the thread keep it going. i will get my temp up sooner or later.

Cpu temp

im rocking a thermaltake v9 case with 2 extra added neon fans

CPU - 32 Degrees on idle
core #1 64 Degrees on idle
core#2 64 Degrees on idle
GFX TEMP- 56 Degrees on idle

I have a compaq presario s4100nx everything standard except case is custom. cpu temp idle is 34 ambient is 40 idle. under 100% load the cpu is 42 and the ambient is 51.
1.5 voltage. or something like that i dont quite know the volts.

thread looks good keep it up