Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Login to participate.

Go Back   TechSpot OpenBoards > TS Community > The Meeting 'spot'

What’s your feedback on the 3 1/2” floppies?

Reply
Bookmark / Share this page
Thread Tools
  #1  
Old 04-21-2007
ravisunny2's Avatar
TechSpot Enthusiast
 
Location: Jaipur
Member since: Nov 2006, 598 posts
System specs
What’s your feedback on the 3 1/2” floppies?

I have found the 3 1/2” floppies (1.44 MB), to be notoriously unreliable. There have been numerous instances of failure for a single read-write.

In 1999, when I got my P-III, I had the older 5 1/4” fdd installed too, and encountered numerous raised eyebrows.

The 1.2 MB floppies were far more reliable. But now they aren’t even available in the market.

Now that the cd writer is affordable, I’ve installed one, and my backups are safe again.

But a couple of problem still linger

1) What if I want to flash my BIOS ?

2) So far, it seems to me, that the only way to make a cd bootable, is to use a fdd (at least in Win 98SE).

I sure hope I’m wrong on both counts, and that the fdd can be dispensed with altogether.
Reply With Quote
  #2  
Old 04-21-2007
Nodsu's Avatar
TS Special Forces
 
Location: Estonia
Member since: Feb 2002, 9,430 posts
System specs
When you need to flash your BIOS (and there is no OS native tool available), you make a bootable CD using a floppy image. The CDs ability to emulate a floppy is one of the major factors in the demise of the latter. You can also use premade DOS-booting CDs and a USB flash drive for example.

Yes, you do need a floppy disk or an image file to create custom bootable CDs, but you can use a virtual floppy disk device if your OS-computer does not have one built in (Windows).

In my experience, properly kept floppies are pretty reliable. At least not a lot worse than el cheapo CD-recordables that start going flaky after a couple of years. Not to mention flash drives that start failing more and more often as the technology gets cheaper and the chip densities increase.
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
  #3  
Old 04-21-2007
TechSpot Member
 
Location: Southern Ontario
Member since: Apr 2007, 129 posts
I've never even heard of a flash drive failing, except when people are stupid and drop them or shock the jack.

I've also never needed a floppy to boot from a CD. I've booted to two Linux distributions and Windows XP from CDs with no trouble at all.

As for 3.5" floppies, they should be beaten, stepped on, poisoned, electrocuted and burned! I've never used the 5.25" ones much, but I've heard they're far worse than the smaller variety.

Rewritable CDs probably seemed like a good idea at the time, but they stink. They don't write properly unless you get some kind of X-treme CD-RW drive that probably would cost nearly a hundred dollars! Okay, I may be exaggerating a little, but I've had nothing but trouble from them.

If you want to get a file from one place to another, the best way is to email it to yourself. I did that with homework files, but then the stupid school board network admins blocked my email client. I sent them an email, complaining. They never replied. Anyway, the only other good way is to use a USB key. Granted, key density increasing is a problem; Would it be so hard for the companied to just make them bigger?
Reply With Quote
  #4  
Old 04-21-2007
SNGX1275's Avatar
TS Special Forces
 
Location: Rolla, Missouri, USA
Member since: Feb 2002, 8,244 posts
System specs
Quote:
Originally Posted by Envergure
I've never even heard of a flash drive failing, except when people are stupid and drop them or shock the jack.
Oh my. I see you haven't been hanging around in Storage & Networking or Other Hardware then, there are at least 2 a week.

Quote:
Originally Posted by ravisunny2
The 1.2 MB floppies were far more reliable. But now they aren’t even available in the market.
Never used those. I've used DD (800Kb I believe) and HD (1.44Mb), had problems with both. Not sure on the DD but the HD ones don't seem to age well, every once in a while I'll need one and almost always the one I dig up has something wrong with it.
Reply With Quote
  #5  
Old 04-22-2007
ravisunny2's Avatar
TechSpot Enthusiast
 
Location: Jaipur
Member since: Nov 2006, 598 posts
System specs
Quote:
You can also use premade DOS-booting CDs
Sorry if this sounds silly, but can we use, say, Nero, to burn onto these DOS-booting CDs (retaining their bootability) ?

Quote:
In my experience, properly kept floppies are pretty reliable.
My 1.2 MB floppies were very reliable (except for the time there was a fungus attack), but my experience with the 1.44 MB was dismal. Maybe, I was just plain unlucky.
Reply With Quote
  #6  
Old 04-23-2007
Nodsu's Avatar
TS Special Forces
 
Location: Estonia
Member since: Feb 2002, 9,430 posts
System specs
Well, you could extract the floppy image from the CD and then use the same image to create your own custom CD.. My point with these premade ones was that you don't need to burn a custom CD at all. Download and burn the .iso, all your own files would be on a USB drive that you access from the DOS prompt.

You may be interested in the UBCD: http://www.ultimatebootcd.com
They have guides on how to customise thing for your own needs too.
Reply With Quote
  #7  
Old 04-23-2007
ravisunny2's Avatar
TechSpot Enthusiast
 
Location: Jaipur
Member since: Nov 2006, 598 posts
System specs
Thanks for the link, Nodsu.
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
Reply
Thread Tools

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
feedback PADA Security and the Web 1 10-28-2006 05:27 AM
Why don't floppies work anymore? fw2004 Storage & Networking 19 06-09-2006 02:42 AM
Floppies & airport x-rays abecedarian Other Hardware 2 08-21-2005 08:29 PM
Floppy drive changing filesytem of floppies to raw chessonly Other Hardware 6 05-22-2005 12:59 PM
win 98 on floppies (HELP NEED URGENTLY!) davesandell Windows OS 2 10-29-2003 01:27 PM


All times are GMT -4. The time now is 06:28 PM.