BCCode : 9c error

By funkky73
Dec 9, 2005
Topic Status:
Not open for further replies.
  1. Hi any one can help me with following error.

    My system suddenly shut down and gives me below error

    BCCode : 9c BCP1 : 00000004 BCP2 : 80545070 BCP3 : B2000000
    BCP4 : 00070F0F OSVer : 5_1_2600 SP : 2_0 Product : 256_1
  2. cpc2004

    cpc2004 Newcomer, in training Posts: 2,044

    Hi,

    Disable hyperthtread if you are using Intel CPU. Do you have TV card install at your PC?
  3. funkky73

    funkky73 Newcomer, in training Topic Starter

    No

    mine is a AMD Athlon(tm) 64 Processor 3000+ 2.01 Ghz 960 MB of Ram
    OS : windows XP
  4. funkky73

    funkky73 Newcomer, in training Topic Starter

    i attaced my minidump files.

    Hi,

    I attached my minidump files also. Can any one help me.

    Attached Files:

  5. howard_hopkinso

    howard_hopkinso Newcomer, in training Posts: 25,948   +17

    Hello and welcome to Techspot.

    All your minidumps crash with a bugcheck of 9C.

    0x0000009C: MACHINE_CHECK_EXCEPTION

    This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

    As you can see from the above, you almost certainly have a hardware problem.

    Go HERE and follow the instructions for testing your ram/hard drive.

    If that doesn`t help, you will need to diagnose which hardware is the problem.

    Make sure your system is not overclocked in any way. Remove any hardware not required to run your system.

    Regards Howard :wave: :wave:
  6. funkky73

    funkky73 Newcomer, in training Topic Starter

    Howard,

    Thanks for the help. I will go through the solution given by you and get back to you if i need more help.

    Regards.
  7. Fuzion

    Fuzion Newcomer, in training Posts: 18

    did u have any joy funkky?
  8. utnho

    utnho Newcomer, in training

    My computer has the exact same problem.
    What did you do to fix yours, funkky73?
  9. Fuzion

    Fuzion Newcomer, in training Posts: 18

    :( i never did resolve the problem
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.