Hello Guys , i have bought a laptop from greece 1 year now and i face all the time BSOD.

I Would like to have some Help cause i am very tired of this thing.
I Have written down all the BSOD.
i face all the time these one...

irq not less or equal
Bad pool header
Page fault in non paged area
kernel stuck in page error
memory management
driver state failure
kernel data in page error

My laptop has the Above Hardware information....
Hopefully someone can help ,

Best Regards

Odysseas

SiSoftware Sandra


Processor
Model : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Speed : 2.00GHz
Cores per Processor : 2 Unit(s)
Threads per Core : 1 Unit(s)
Type : Mobile, Dual-Core
Internal Data Cache : 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size
L2 On-board Cache : 4MB, ECC, Synchronous, ATC, 16-way, 64 byte line size, 2 threads sharing

System
System : To Be Filled By O.E.M. To Be Filled By O.E.M.
Platform Compliance : Intel Centrino Mobile Technology
Mainboard : To be filled by O.E.M. To be filled by O.E.M.
Bus(es) : ISA PCI PCIe IMB USB FireWire/1394
Multi-Processor (MP) Support : No
Multi-Processor Advanced PIC (APIC) : Yes
System BIOS : American Megatrends Inc. PlaiDF06
Total Memory : 2GB DDR2 SO-DIMM

Chipset
Model : Arima Computer 955XM/945GM/PM/GMS/940GML Express Processor to DRAM Controller
Front Side Bus Speed : 4x 333MHz (1.33GHz)
Total Memory : 2GB DDR2 SO-DIMM
Memory Bus Speed : 4x 333MHz (1.33GHz)

Video System
Adapter : ATI Mobility Radeon X1600 (256MB, PCIe 1.00 x16, PS3.0, VS3.0)

Storage Devices
WDC WD1200BEVS-00RST0 120GB (SATA150, 2.5", 5400rpm, NCQ, 8MB Cache) : 112GB (C (D
Seagate FreeAgentPro FW4 750GB (FireWire/1394, NCQ) : 699GB (F
TSSTcorp CD/DVDW TS-L632D (ATA33, DVD+-RW, CD-RW, 2MB Cache) : N/A (E

Logical Storage Devices
Backup Drive (D : 63GB (NTFS) @ WDC WD1200BEVS-00RST0 120GB (SATA150, 2.5", 5400rpm, NCQ, 8MB Cache)
Windows Vista Ultimate C : 49GB (NTFS) @ WDC WD1200BEVS-00RST0 120GB (SATA150, 2.5", 5400rpm, NCQ, 8MB Cache)
CD-ROM/DVD E : N/A @ TSSTcorp CD/DVDW TS-L632D (ATA33, DVD+-RW, CD-RW, 2MB Cache)
Storage Drive - Backup (F : 699GB (NTFS) @ Seagate FreeAgentPro FW4 750GB (FireWire/1394, NCQ)

Peripherals
LPC Hub Controller 1 : Arima Computer 82801GBM (ICH7-M) LPC Interface Controller
Audio Device : Arima Computer 82801G (ICH7 Family) High Definition Audio
Audio Codec : Realtek Semiconductor 260 High Definition Audio
Audio Codec : Lucent/Agere Systems (Was: AT&T MicroElectronics) HDA softmodem
Disk Controller : Arima Computer 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller
USB Controller 1 : Arima Computer 82801G (ICH7 Family) USB Universal Host Controller
USB Controller 2 : Arima Computer 82801G (ICH7 Family) USB Universal Host Controller
USB Controller 3 : Arima Computer 82801G (ICH7 Family) USB Universal Host Controller
USB Controller 4 : Arima Computer 82801G (ICH7 Family) USB Universal Host Controller
USB Controller 5 : Arima Computer 82801G (ICH7 Family) USB 2.0 Enhanced Host Controller
FireWire/1394 Controller 1 : Arima Computer R5C832 IEEE-1394 Controller

Printers and Faxes
Printer : PDFConverter (4000x4000, Colour)
Printer : Microsoft XPS Document Writer (600x600, Colour)
Printer : Microsoft Office Document Image Writer Driver (200x200)
Printer : HP Photosmart C5200 series (1200x1200, USB, Colour)
Fax : Microsoft Shared Fax Driver (200x200)

Network Services
Wireless Adapter 1 : Intel(R) PRO/Wireless 3945ABG Network Connection (802.11g (ERP), TKIP, 54Mbps)

Power Management
Mains (AC) Line Status : On-Line

Operating System(s)
Windows System : Microsoft Windows Vista Ultimate 6.00.6001 (Service Pack 1)
Platform Compliance : x86

Windows Experience Index
Current System : 4.1

What i Have Tried

I Have Downgraded To windows XPSP2 (The Same Problems)
i Have made a new Setup vista (same)
i have installed all the drivers again (same)
i have tried to operate my laptop without using peripheral such as (printer, mouse, extern disk,usb hub,wireless keybord+mouse,cooler)
i have tried to disable modem,bluetooth,lan,pcmcia,and card reader(same)
I Have contacted AMI For an Bios Upgrade , but there is no Bios Upgrade for this motherbord.
I Have e-mailed my resseller for this problem and informed me that there is no problem with this motherboard and doesnt need bios upgrade.
Next Day
I Have made A Full Check With Tune UP Utilities (everything ok)
Defragment of all disks is ok
I Made THE MEMTEST WITH 12 PASS NO errors at all
virus check online (COMPLETED) with no virus
spybot search and destroy finished with no problems....
Running Western Digital Data Lifeguard Diagnostics ..... Making An Extended Test ....



After making all the tests you recommended me, i Found Bad Sectors That May Be Repairable and after clicking repair , (Bad Sectors Were Repaired).

I Will Check my Laptop Now and if anythings comes again i will write you.

One Question...

After repairing the bad sectors will they appear again or are they going to come back???
Do you recommend me buy another HDD So i wont have any problems again???

Thank you very much for your quick and helpfull support

Odysseas

Do the following standard diagnostic steps:

A. Scan for viruses.


B. Run Memtest on your RAM.

1. Go to www.memtest.org and download the latest ISO version. It is free and perfectly safe.

2. Burn to a CD.

3. Place CD in your drive and reboot with CD in drive. (You might have to place your drive as first bootable in your BIOS) The test will take over.

4. Let it run for a LONG time. The rule is a minimum of 7 Passes. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

5. If you have errors you have corrupted memory and it needs to be replaced.

6. Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


C. Run ChkDsk

D. Run a full harddrive diagnostics by using the fee utility that your harddrive manufacturer provides. you can get it off their website.

* Get back to us with the results.