Error f3-f100-0010

Inactive
By Aliviamonkey
Dec 26, 2012
Topic Status:
Not open for further replies.
  1. Please help me. I have read this is a bad Trojan virus, could you please help me remove it. Obviously norton can not protect against it and it literally killed mine and wiped it off my computer. Your help would be most appreciated.
  2. Broni

    Broni Malware Annihilator Posts: 46,179   +251

    Welcome aboard [​IMG]

    Please, complete all steps listed here: http://www.techspot.com/vb/topic58138.html
    Make sure, you PASTE all logs. If some log exceeds 50,000 characters post limit, split it between couple of replies.
    Attached logs won't be reviewed.

    Please, observe following rules:
    • Read all of my instructions very carefully. Your mistakes during cleaning process may have very serious consequences, like unbootable computer.
    • If you're stuck, or you're not sure about certain step, always ask before doing anything else.
    • Please refrain from running any tools, fixes or applying any changes to your computer other than those I suggest.
    • Never run more than one scan at a time.
    • Keep updating me regarding your computer behavior, good, or bad.
    • The cleaning process, once started, has to be completed. Even if your computer appears to act better, it may still be infected. Once the computer is totally clean, I'll certainly let you know.
    • If you leave the topic without explanation in the middle of a cleaning process, you may not be eligible to receive any more help in malware removal forum.
    • I close my topics if you have not replied in 5 days. If you need more time, simply let me know. If I closed your topic and you need it to be reopened, simply PM me.
  3. Aliviamonkey

    Aliviamonkey Newcomer, in training Topic Starter

    Okay how do I access the Internet from my laptop with the issue if it continues to shut itself down?
  4. Broni

    Broni Malware Annihilator Posts: 46,179   +251

    You didn't tell me it keeps shutting down.
    Same problem in safe mode?
    What Windows version is it?
  5. Aliviamonkey

    Aliviamonkey Newcomer, in training Topic Starter

    Windows 7 , when it boots up I get error recovery message , when it's loads Up I get the f3-f100-0010. Yes also in safe mode. I apologize I thought I had told you.
  6. Broni

    Broni Malware Annihilator Posts: 46,179   +251

    For x32 (x86) bit systems download Farbar Recovery Scan Tool 32-Bit and save it to a flash drive.
    For x64 bit systems download Farbar Recovery Scan Tool 64-Bit and save it to a flash drive.

    Plug the flashdrive into the infected PC.

    If you are using Windows 8 consult How to use the Windows 8 System Recovery Environment Command Prompt to enter System Recovery Command prompt.

    If you are using Vista or Windows 7 enter System Recovery Options.

    To enter System Recovery Options from the Advanced Boot Options:
    • Restart the computer.
    • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
    • Use the arrow keys to select the Repair your computer menu item.
    • Select US as the keyboard language settings, and then click Next.
    • Select the operating system you want to repair, and then click Next.
    • Select your user account an click Next.

    To enter System Recovery Options by using Windows installation disc:
    • Insert the installation disc.
    • Restart your computer.
    • If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
    • Click Repair your computer.
    • Select US as the keyboard language settings, and then click Next.
    • Select the operating system you want to repair, and then click Next.
    • Select your user account and click Next.

    On the System Recovery Options menu you will get the following options:

      • Startup Repair
        System Restore
        Windows Complete PC Restore
        Windows Memory Diagnostic Tool
        Command Prompt
    • Select Command Prompt
    • In the command window type in notepad and press Enter.
    • The notepad opens. Under File menu select Open.
    • Select "Computer" and find your flash drive letter and close the notepad.
    • In the command window type e:\frst (for x64 bit version type e:\frst64) and press Enter
      Note: Replace letter e with the drive letter of your flash drive.
    • The tool will start to run.
    • When the tool opens click Yes to disclaimer.
    • Press Scan button.
    • It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.

    Next...

    Re-run FRST again.
    Type the following in the edit box after "Search:".

    services.exe

    Click Search button and post the log (Search.txt) it makes in your reply.

    I'll expect two logs:
    - FRST.txt
    - Search.txt
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.