Front USB Names Different

[Bloo Ice]

Hi. My new case is a Logisys acryllic case....100% see through. My new motherboard is a Gigabyte GA-K8NS. The case has 2 front USB ports, and the cables coming out of them are
White = Port -
Green = Port +
Red = (+)
Black = (-)

The motherboard is the standard 1-8 and 10 pin setup. They are labeled as
1 = Power
2 = Power
3 = USB Dx-
4 = USBDy-
5 = USB Dx+
6 = USB Dy+
7 = GND
8 = GND
10 = NC

My question is...what goes where? My other setups were much easier to hook up [they weren't the same but closer]. Thanks

 

[Liquidlen]

I have two different boards but they are marked the same
White=Dx- or #3
Green= Dx+ or #5
Red= Power or #1
Black =Groundor #7

2nd usb corresponds = 2,4,6,8

You should confirm ,I must set jumpers to channel these connections to two different items.
The manual must show this

 

[fishhookz]

Google it, there is a ton of diagrams on the web.

 

[Bloo Ice]

Google it, there is a ton of diagrams on the web.

I did. I found nothing that applied to me. That's why I came here

 

[RealBlackStuff]

Pin-layout:
2-4-6-8-10
1-3-5-7-nc

First USB connector:
1= your Power 1 --> red
3= your USB-Dx- 3 -->white
5= your USB-Dx+ 5 --> green
7= your GND 7 --> black

Second USB connector:
2= your Power 2
4= your USB-Dy- 4
6= your USB-Dy+ 6
8= your GND 8

White = Port - = Dx- or Dy-
Green = Port + = Dx+ or Dy+
Red = (+) = Power
Black = (-) = GND

 

[Bloo Ice]

Thank you all so much. Thanks to your help, I was able to get another 2 USB ports in the back plugged in. Thanks!