HI hopefully someone can help me or point me in the right direction,
I have got a E Machines 6250 which is running Windows XP Home Edition. My machine keeps rebooting at random intervals, If I checked the Event Viewer and i get the following error
Source -System Error, Category - (102), Event - 1003

Error code 100000d1, parameter1 00000020, parameter2 00000002, parameter3 00000001, parameter4 f70ba07d.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 32 30 2c 20 000020,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 66 37 30 62 01, f70b
0050: 61 30 37 64 a07d


Any Advise ??

Looks similar to what was posted here. (duxcw.com)

They seem to have narrowed it down to a graphics card issue. If you're in the same boat, you may want to try updating your graphic card drivers or swapping out your card for another.

Hello and welcome to Techspot.

Look below for info about your bugcheck error.

0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL

The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.

Go HERE and follow the instructions.

If that doesn`t help. Zip 5 or 6 minidumps together, and attach them here.

Regards Howard :wave: :wave:

Thanks

Thanks for the advise i will give it ago.

Alex :giddy:

Computer still crashing - Help needed!!!!

Hi, my computer is still crashing and the company that support my computer are being useless, if any one out ther can help me i would be most grateful.
Story so far, the computer still crashes out at random, in the event log it always has the same error code (Source - System Error, category (102) event 1003)) error code seems to change, latest one :
Error code 00000044, parameter1 83b68e28, parameter2 00000d62, parameter3 00000000, parameter4 00000000.
The machine has had the mother board replaced (which includes the on board graphics/sound card) the power supply has been replaced, i have reinstalled windows 8-10 times (destructive restore) re-installed anti virus software before pluggin it onto the net, removed the tick from 'automatically restart' from the start up and recovery menu (control panel), The fan speed has been checked and CP temp all running ok, tried running a deep scan on the hard drive, defrag, checked virtual memory settings and still nothing.....
Im at a loss, the company i bought the machine from wont replace it either, Please please please help

Very lost
Alex

upload your last 3 minidumps in zip format.

Error's

I asume you want the errors, I havent got winzip on my machine
these are the last 3 i have recived
-----------------------------------------------------------------

Error code 1000000a, parameter1 75292475, parameter2 00000002, parameter3 00000000, parameter4 806d28ce.

0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 37 35 eters 75
0030: 32 39 32 34 37 35 2c 20 292475,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 38 30 36 64 00, 806d
0050: 32 38 63 65 28ce

-------------------------------------------------

Error code 100000d1, parameter1 f7f75dd9, parameter2 00000002, parameter3 00000000, parameter4 f70cb9a8.

0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 66 37 eters f7
0030: 66 37 35 64 64 39 2c 20 f75dd9,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 66 37 30 63 00, f70c
0050: 62 39 61 38 b9a8

-------------------------------------------------------------------

Error code 10000050, parameter1 e3639a20, parameter2 00000000, parameter3 f73328bc, parameter4 00000001.

0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 65 33 eters e3
0030: 36 33 39 61 32 30 2c 20 639a20,
0038: 30 30 30 30 30 30 30 30 00000000
0040: 2c 20 66 37 33 33 32 38 , f73328
0048: 62 63 2c 20 30 30 30 30 bc, 0000
0050: 30 30 30 31 0001

-------------------------------------------------------------------

I also appear to get alot of DHCP error, loosing the lease to the IP address (Source DHCP, Category none, Event 1000 )
Thanks for replying, hope this helps
Cheers
Alex

A lot of people with an EvilMachine PC (that's what you got) found it beneficial to replace the PSU (piece of Bestec crap). Try and borrow one from a mate, before you buy.
Loads of posts all over this forum with EvilPC problems.
They range at the lowest end of the low-end PCs, down there with Packard Bell PCs, which actually have less problems than EvilMachine!