TechSpot

Help on hanging

By matrix
Aug 24, 2008
  1. i have learnt that any time am using my A.C of laptop the hanging is very fast and and frequent and i have also noticed that when i start the fan will role for some minute and after that it will stop again and it will not role again here are the error

    Event Type: Error
    Event Source: Cdrom
    Event Category: None
    Event ID: 11
    Date: 8/24/2008
    Time: 1:31:42 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The driver detected a controller error on \Device\CdRom0
    Data:
    0000: 00 01 68 00 01 00 b8 00 ..h...¸.
    0008: 00 00 00 00 0b 00 04 c0 .......À
    0010: 01 01 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........
    0028: 0a 08 00 00 00 00 00 00 ........
    0030: ff ff ff ff 02 00 00 00 ÿÿÿÿ....
    0038: 40 00 00 c4 02 00 00 00 @..Ä....
    0040: 00 00 0a 12 48 00 00 00 ....H...
    0048: 00 00 00 00 0a 00 00 00 ........
    0050: 90 f0 2d 82 58 95 2a 82 ð-?X?*?
    0058: 00 00 00 00 70 1e 04 82 ....p..?
    0060: 00 00 00 00 00 00 00 00 ........
    0068: 25 00 00 00 00 00 00 00 %.......
    0070: 00 00 00 00 00 00 00 00 ........
    0078: 70 00 04 00 00 00 00 0a p.......
    0080: 00 00 00 00 40 86 00 00 ....@?..
    0088: 00 00 00 00 00 00 00 00 ........

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7026
    Date: 8/24/2008
    Time: 1:31:48 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The following boot-start or system-start driver(s) failed to load:
    ShldDrv


    Event Type: Error
    Event Source: Software Update Services Client
    Event Category: Software Sync
    Event ID: 149
    Date: 8/22/2008
    Time: 10:36:17 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.


    Data:
    0000: 57 69 6e 33 32 48 52 65 Win32HRe
    0008: 73 75 6c 74 3d 30 78 30 sult=0x0
    0010: 30 30 30 30 30 30 30 20 0000000
    0018: 55 70 64 61 74 65 49 44 UpdateID
    0020: 3d 7b 30 30 30 30 30 30 ={000000
    0028: 30 30 2d 30 30 30 30 2d 00-0000-
    0030: 30 30 30 30 2d 30 30 30 0000-000
    0038: 30 2d 30 30 30 30 30 30 0-000000
    0040: 30 30 30 30 30 30 7d 20 000000}
    0048: 52 65 76 69 73 69 6f 6e Revision
    0050: 4e 75 6d 62 65 72 3d 30 Number=0
    0058: 20 43 6c 69 65 6e 74 56 ClientV
    0060: 65 72 73 69 6f 6e 3d 35 ersion=5
    0068: 2e 34 2e 33 37 39 30 2e .4.3790.
    0070: 32 30 39 36 20 00 2096 .


    Event Type: Error
    Event Source: Setup
    Event Category: None
    Event ID: 60055
    Date: 8/20/2008
    Time: 2:37:19 PM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    Windows Setup encountered non-fatal errors during installation. Please check the setuperr.log found in your Windows directory for more information.


    Event Type: Error
    Event Source: DCOM
    Event Category: None
    Event ID: 10005
    Date: 8/20/2008
    Time: 2:28:31 PM
    User: NT AUTHORITY\SYSTEM
    Computer: OWNER-5599D1C22
    Description:
    DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service SENS with arguments "" in order to run the server:
    {D3938AB0-5B9D-11D1-8DD2-00AA004ABD5E}
     
  2. Bobbye

    Bobbye Helper on the Fringe Posts: 16,335   +36

    Thank you. I have arranged the Errors in consecutive date and time order:
     
  3. matrix

    matrix TS Rookie Topic Starter

    i have follow the proccedure you gave to me but the error is still there but i noticed one thing in the proccess of typing these posted again i learnt that the proccessor fan start working
    and stop again after few minute

    Event Type: Error
    Event Source: Application Hang
    Event Category: (101)
    Event ID: 1002
    Date: 8/24/2008
    Time: 6:52:31 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    Hanging application wmplayer.exe, version 9.0.0.3133, hang module hungapp, version 0.0.0.0, hang address 0x00000000.


    Data:
    0000: 41 70 70 6c 69 63 61 74 Applicat
    0008: 69 6f 6e 20 48 61 6e 67 ion Hang
    0010: 20 20 77 6d 70 6c 61 79 wmplay
    0018: 65 72 2e 65 78 65 20 39 er.exe 9
    0020: 2e 30 2e 30 2e 33 31 33 .0.0.313
    0028: 33 20 69 6e 20 68 75 6e 3 in hun
    0030: 67 61 70 70 20 30 2e 30 gapp 0.0
    0038: 2e 30 2e 30 20 61 74 20 .0.0 at
    0040: 6f 66 66 73 65 74 20 30 offset 0
    0048: 30 30 30 30 30 30 30 0000000


    Event Type: Error
    Event Source: LoadPerf
    Event Category: None
    Event ID: 3001
    Date: 8/20/2008
    Time: 2:24:29 PM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The performance counter name string value in the registry is incorrectly formatted. The bogus string is 2352, the bogus index value is the first DWORD in Data section while the last valid index values are the second and third DWORD in Data section.


    Data:
    0000: 30 09 00 00 2e 09 00 00 0.......
    0008: 2f 09 00 00 97 02 00 00 /...—...
     
  4. matrix

    matrix TS Rookie Topic Starter

    another one again

    Event Type: Error
    Event Source: PlugPlayManager
    Event Category: None
    Event ID: 12
    Date: 8/24/2008
    Time: 8:05:17 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The device 'TEAC CD-224E' (IDE\CdRomTEAC_CD-224E____________________________1.7A____\5&35c6ca11&0&0.0.0) disappeared from the system without first being prepared for removal.


    Data:
    0000: 00 00 00 00 ....
     
  5. Bobbye

    Bobbye Helper on the Fringe Posts: 16,335   +36

    It is likely you have a heat-related issue.

    Most of the Errors you are reporting ave to do with the CD Drive
    And this links the media player with it.
    Event Type: Error, Source: Application Hang Event ID: 1002, Description: Hanging application wmplayer.exe,

    Event Type: Error, Source: PlugPlayManager, Event ID: 12
    Description: The device 'TEAC CD-224E' (IDE\CdRomTEAC_CD-224E____________________________1.7A____\5&35c6ca11&0&0.0.0) disappeared from the system without first being prepared for removal.

    TEAC CD-224E Slimline CD-ROM Drive TEAC is an Internal tray-loading CD-ROM drive with fast transfer rate;
    Are you using a removable device but not going through the 'safely remove hardware' steps? Other possible causes of this:
    1. Loose connection in the power socket> Open up the computer and disconnecti and reconnect cables
    2. The CDROM is taking too long to read the disk, or the firmware in the CDROM is causing the CDROM to become uncontrollable when certain CD's are inserted.

    3. A NIC disappeared in device manager. However, it seems that certain laptop NICs have this feature built-in to save power. Plug in the external power-supply to enable the NIC again. Disabling this feature varies depending on the driver. On some HP NICs, it is in the driver itself (Device Manager). On some Dell NICs, it is in the Dell QuickSet application.

    4. This event can occur when a drive that is part of a software RAID in Windows Server 2003 suddenly dies.

    5. This event may be logged if high-volume disk I/O operations are performed and a time-out occurs while the LDM (Logical Disk Manager) is interacting with PNP (Plug and Play).

    Make sure the CD Drive is empty when you boot up.
    Uncheck any processes associated with the CD, WMP, PlugnPlay functions on the Startup menu.

    For Error 3001, Source LoadPerf:
    See Microsoft TechNet: http://tinyurl.com/5ljkcy
     
  6. matrix

    matrix TS Rookie Topic Starter

    Big support on hanging and fan not rolling

    i have discover that the day you gave solution to the error i made a mistake of not changing it in safe mode but after i delete the shhlvd i discover that the fan roll very well later stop again pls when reply me i need details and deep support pls if there is need for me to change the cdrom tell me

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 9/2/2008
    Time: 1:20:49 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The Panda Process Protection Service service failed to start due to the following error:
    The system cannot find the path specified.


    Event Type: Error
    Event Source: Cdrom
    Event Category: None
    Event ID: 11
    Date: 9/2/2008
    Time: 1:15:47 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The driver detected a controller error on \Device\CdRom0.
    Data:
    0000: 00 01 68 00 01 00 b8 00 ..h...¸.
    0008: 00 00 00 00 0b 00 04 c0 .......À
    0010: 01 01 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........
    0028: d1 07 00 00 00 00 00 00 Ñ.......
    0030: ff ff ff ff 02 00 00 00 ÿÿÿÿ....
    0038: 40 00 00 c4 02 00 00 00 @..Ä....
    0040: 00 00 0a 12 48 00 00 00 ....H...
    0048: 00 00 00 00 0a 00 00 00 ........
    0050: e0 8a 36 82 98 c9 3c 82 à?6??É<?
    0058: 00 00 00 00 80 89 05 82 ....??.?
    0060: 00 00 00 00 00 00 00 00 ........
    0068: 25 00 00 00 00 00 00 00 %.......
    0070: 00 00 00 00 00 00 00 00 ........
    0078: 70 00 04 00 00 00 00 0a p.......
    0080: 00 00 00 00 40 86 00 00 ....@?..
    0088: 00 00 00 00 00 00 00 00 ........


    Event Type: Error
    Event Source: PlugPlayManager
    Event Category: None
    Event ID: 12
    Date: 8/26/2008
    Time: 8:10:52 AM
    User: N/A
    Computer: OWNER-5599D1C22
    Description:
    The device 'TEAC CD-224E' (IDE\CdRomTEAC_CD-224E____________________________1.7A____\5&35c6ca11&0&0.0.0) disappeared from the system without first being prepared for removal.
    Data:
    0000: 00 00 00 00 ....
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...