Help Pse. Page fault in non page area

Status
Not open for further replies.
I just DIY a new PC with the following:
C2D Q6600
Asus P5K Deluxe
2Gb XMS2 DDR2 800mhz
300 Gb seagate HDD
Galaxy 8800GT 512Mb
Enermax Infiniti 720W

I get BSOD intermitenly w/o any apparent reasons. It states Page Fault in non Paged Area.
The minidump is attached.

Would be most grateful is someone could point out what the problem cld be. Many Thanks!

"The computer has rebooted from a bugcheck. The bugcheck was:
0x10000050 (oxa15aca98, 0x00000000,0x804f4b92,0x00000000)"

I have replaced new rams and PSU and I'm still getting the same problems. *sigh*
 

Attachments

  • Mini022808-03.dmp
    88 KB · Views: 6
  • Mini022808-01.dmp
    88 KB · Views: 5
Inside the 3 MiniDumps:

BugCheck 10000050, {a29f4190, 0, 804f4b92, 0}
Could not read faulting driver name
Probably caused by : ntkrpamp.exe

BugCheck 10000050, {a1da6de0, 0, 804f4b92, 0}
Could not read faulting driver name
Probably caused by : ntkrpamp.exe

BugCheck 10000050, {a15aca98, 0, 804f4b92, 0}
Could not read faulting driver name
Probably caused by : ntkrpamp.exe

------------------

I believe your best approach would be to

Scan with Memtest
Stop any overclocking
Update all drivers
Can be related to high intense programs (like Norton AntiVirus)
 
Hi Guru,

Thanks for your advice and much appreciated!

I do not think the problem lies with the ram, I just replaced 2 brand new sticks of Cosair 667 ram with XMS2 ram.

I suspect the problem could be with the antivirus s/w. I'm using Nod32, will disable it and monitor the PCs stability. Thks again!

Rgds
 
Status
Not open for further replies.
Back