On what graphics setting should I play Far Cry 3?

By Mostafa Hani
Feb 20, 2013
Post New Reply
  1. Display Devices
    Card name: AMD Radeon HD 7610M
    Manufacturer: Advanced Micro Devices, Inc.
    Chip type: AMD Radeon Graphics Processor (0x6742)
    DAC type: Internal DAC(400MHz)
    Device Type: Full Device
    Device Key: Enum\PCI\VEN_1002&DEV_6742&SUBSYS_FB3111…
    Display Memory: 3802 MB
    Dedicated Memory: 1010 MB
    Shared Memory: 2791 MB
    Current Mode: 1366 x 768 (32 bit) (60Hz)
    Monitor Name: Generic PnP Monitor
    Monitor Model: unknown
    Monitor Id: LGD033A
    Native Mode: 1366 x 768(p) (60.019Hz)
    Output Type: Internal
    Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,a…
    Driver File Version: 8.17.0010.1140 (English)
    Driver Version:
    DDI Version: 11
    Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
    Driver Model: WDDM 1.2
    Graphics Preemption: DMA
    Compute Preemption: DMA
    Driver Attributes: Final Retail
    Driver Date/Size: 10/17/2012 03:12:54, 1112064 bytes
    WHQL Logo'd: Yes
    WHQL Date Stamp:

    Rank Of Driver: 00E00001
    Video Accel: ModeMPEG2_A ModeMPEG2_C
    System Information
    Time of this report: 2/20/2013, 15:38:09
    Machine name: SHARK6-PC
    Operating System: Windows 8 Single Language 64-bit (6.2, Build 9200) (9200.win8_gdr.130108-1504)
    Language: English (Regional Setting: English)
    System Manufacturer: TOSHIBA
    System Model: Satellite C850-B717
    BIOS: 6.10
    Processor: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (8 CPUs), ~2.4GHz
    Memory: 6144MB RAM
    Available OS Memory: 6096MB RAM
    Page File: 3966MB used, 8272MB available
    Windows Dir: C:\windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.02.9200.16384 64bit Unicode

    I tried playing on Ultra, very high and high but these seemed to lag a small bit, medium and low were good.
    thx in advance :)
  2. St1ckM4n

    St1ckM4n TS Evangelist Posts: 2,920   +627

    Resolution 1366 x 768
    Medium preset
    AA off
    Shadows Low
    Textures med or high.

    Your graphics card is super-low-end. High quality just won't work for you. :(
  3. Jad Chaar

    Jad Chaar TS Evangelist Posts: 6,473   +963

    This may be a bit too much even. Make sure you update to the latest 13.1 drivers and maybe you can scrape these settings out.
  4. St1ckM4n

    St1ckM4n TS Evangelist Posts: 2,920   +627

    ^-- Yeah, good point.

    If it's still lagging, you're gonna have to play on Low.. although that's a big self-explanatory. Long-story-short, turn off all options.
  5. Jad Chaar

    Jad Chaar TS Evangelist Posts: 6,473   +963

    Definitely turn off motion blur. Maybe you can ramp up the settings as soon as AMD releases 13.2 since it improves Far Cry 3 performance. But the problem is that AMD usually optimises higher end cards like >7750, they dont really focus on lower end cards. If anything, maybe a small increase, but the drivers for low end cards are usually bug fixes.
  6. St1ckM4n

    St1ckM4n TS Evangelist Posts: 2,920   +627

    Gains are usually percentage based. So games where you're getting 100fps normally gain a lot of fps, but if you're using cards where you struggle to get 25fps you might have a hard time. :D
  7. Jad Chaar

    Jad Chaar TS Evangelist Posts: 6,473   +963

    Haha true

Similar Topics

Create an account or login to comment

You need to be a member in order to leave a comment
TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...

Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.