I have burned countless of CDs and DVDs off in the past, however this time I have ruined almost... six (and counting) CDs while trying to figure out what is going wrong.
I have always used Nero 9 on this computer to burn things, however once I ruined a few CDs i turned to WMP to see if the problem also persisted there.
So.. I really didn't know if I should have posted this in hardware or software, but I check to see if the driver was updated and windows stated that there was no better driver for it than what is on it right now.
At first i recognized that Nero 9 was no longer recognizing the burner, the only option to burn was an image recorder. I went into the Nero Burn Right and set it at everyone, after which the burner option re-appeared. I tried to burn a CD again, though received the same error.
After checking the driver and trying a few times, I have run out of ideas. I have tried this using three brands of CDs (I first thought it might have been a faulty batch I was using).
I hope someone can give me some idea as to what is going on, as it had always worked before.. and now it's just pretty useless!
Here is the latest error report from my most recent attempt from Nero:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H62L>Version: DL00 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <DTSOFT BDROM >Version: 1.05 - HA 1 TA 1 - 9.0.9.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500AAKS-00VYA0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H62L atapi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DTSOFT BDROM E: CdRom1
SanDisk Cruzer H: CdRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096172kB)
Free physical memory: 627MB (642864kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2012
JukeBox (MP3, WMA, Nero Digital)
6:22:52 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:22:52 PM #2 Text 0 File Isodoc.cpp, Line 6789
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:22:52 PM #3 Text 0 File Burncd.cpp, Line 3233
HL-DT-ST DVDRAM GSA-H62L
Buffer underrun protection activated
6:22:52 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
6:22:52 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 0. Length: 356078 -> 356076.
6:22:52 PM #6 Text 0 File Burncd.cpp, Line 3563
Turn on Track-At-Once, using CD-R/RW media
6:22:52 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 356078 -> 356076.
6:22:52 PM #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
6:22:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 356078 -> 356076.
6:22:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 356077 ( 79:09.52)
6:22:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
6:22:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST DVDRAM GSA-H62L;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
6:22:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:22:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 356078 (356078) = #356078/79:7.53
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356076 blocks [D: HL-DT-ST DVDRAM GSA-H62L]
--------------------------------------------------------------
6:22:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: HL-DT-ST DVDRAM GSA-H62L] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 729554944, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 356078 | 0 | 0x00
356078 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
6:22:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 356078 -> 356076.
6:22:52 PM #17 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
6:22:52 PM #18 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
6:22:52 PM #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
6:22:52 PM #20 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
6:22:52 PM #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
6:22:52 PM #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 48x (7,200 KB/s)
6:22:52 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:22:52 PM #24 Text 0 File MMC.cpp, Line 22511
Set BUFE: Buffer underrun protection -> ON
6:22:52 PM #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
6:24:40 PM #26 SPTI -600 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
CDB Data: 0x2A 00 00 00 1C 00 00 00 20 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0b293840: Len x10000
0xD2 FE 52 E9 02 F4 68 F4 72 28 79 D9 89 C6 D9 3C
0x1F 7A B2 EB 67 0D 6D E9 9F 9A 81 9F 26 A1 6B 51
0x9A FF BE 5E 7F EF DB EC 37 9E EC 53 7E F1 96 42
6:24:40 PM #27 CDR -600 File Writer.cpp, Line 306
Device not available
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #28 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #29 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04bf5d00: Len x20
6:24:40 PM #30 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #31 CDR -500 File WriterStatus.cpp, Line 322
SCSI command aborted
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #32 TRANSFER -18 File WriterStatus.cpp, Line 322
Could not perform EndTrack
6:24:40 PM #33 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #34 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack
6:24:40 PM #35 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06e4a780: Len x48
6:24:40 PM #36 CDR -500 File WriterStatus.cpp, Line 375
SCSI command aborted
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #37 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation
6:24:40 PM #38 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation
6:24:40 PM #39 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06f4bac0: Len x48
6:24:40 PM #40 CDR -500 File WriterStatus.cpp, Line 375
SCSI command aborted
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #41 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation
6:24:40 PM #42 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06e01e40: Len x48
6:24:40 PM #43 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
6:24:40 PM #44 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 48x (7,200 KB/s)
6:24:40 PM #45 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #46 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:24:40 PM #47 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #48 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #49 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #50 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
6:24:40 PM #51 Text 0 File SCSIPTICommands.cpp, Line 460
UnLockMCN - completed with error 5 for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have always used Nero 9 on this computer to burn things, however once I ruined a few CDs i turned to WMP to see if the problem also persisted there.
So.. I really didn't know if I should have posted this in hardware or software, but I check to see if the driver was updated and windows stated that there was no better driver for it than what is on it right now.
At first i recognized that Nero 9 was no longer recognizing the burner, the only option to burn was an image recorder. I went into the Nero Burn Right and set it at everyone, after which the burner option re-appeared. I tried to burn a CD again, though received the same error.
After checking the driver and trying a few times, I have run out of ideas. I have tried this using three brands of CDs (I first thought it might have been a faulty batch I was using).
I hope someone can give me some idea as to what is going on, as it had always worked before.. and now it's just pretty useless!
Here is the latest error report from my most recent attempt from Nero:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H62L>Version: DL00 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <DTSOFT BDROM >Version: 1.05 - HA 1 TA 1 - 9.0.9.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500AAKS-00VYA0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H62L atapi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DTSOFT BDROM E: CdRom1
SanDisk Cruzer H: CdRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096172kB)
Free physical memory: 627MB (642864kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.4.2012
JukeBox (MP3, WMA, Nero Digital)
6:22:52 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:22:52 PM #2 Text 0 File Isodoc.cpp, Line 6789
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:22:52 PM #3 Text 0 File Burncd.cpp, Line 3233
HL-DT-ST DVDRAM GSA-H62L
Buffer underrun protection activated
6:22:52 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
6:22:52 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 0. Length: 356078 -> 356076.
6:22:52 PM #6 Text 0 File Burncd.cpp, Line 3563
Turn on Track-At-Once, using CD-R/RW media
6:22:52 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 356078 -> 356076.
6:22:52 PM #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
6:22:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 356078 -> 356076.
6:22:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 356077 ( 79:09.52)
6:22:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
6:22:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST DVDRAM GSA-H62L;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
6:22:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:22:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 356078 (356078) = #356078/79:7.53
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356076 blocks [D: HL-DT-ST DVDRAM GSA-H62L]
--------------------------------------------------------------
6:22:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: HL-DT-ST DVDRAM GSA-H62L] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 729554944, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 356078 | 0 | 0x00
356078 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
6:22:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 356078 -> 356076.
6:22:52 PM #17 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
6:22:52 PM #18 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
6:22:52 PM #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
6:22:52 PM #20 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
6:22:52 PM #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
6:22:52 PM #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 48x (7,200 KB/s)
6:22:52 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:22:52 PM #24 Text 0 File MMC.cpp, Line 22511
Set BUFE: Buffer underrun protection -> ON
6:22:52 PM #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
6:24:40 PM #26 SPTI -600 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
CDB Data: 0x2A 00 00 00 1C 00 00 00 20 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0b293840: Len x10000
0xD2 FE 52 E9 02 F4 68 F4 72 28 79 D9 89 C6 D9 3C
0x1F 7A B2 EB 67 0D 6D E9 9F 9A 81 9F 26 A1 6B 51
0x9A FF BE 5E 7F EF DB EC 37 9E EC 53 7E F1 96 42
6:24:40 PM #27 CDR -600 File Writer.cpp, Line 306
Device not available
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #28 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #29 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04bf5d00: Len x20
6:24:40 PM #30 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #31 CDR -500 File WriterStatus.cpp, Line 322
SCSI command aborted
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #32 TRANSFER -18 File WriterStatus.cpp, Line 322
Could not perform EndTrack
6:24:40 PM #33 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #34 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack
6:24:40 PM #35 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06e4a780: Len x48
6:24:40 PM #36 CDR -500 File WriterStatus.cpp, Line 375
SCSI command aborted
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #37 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation
6:24:40 PM #38 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation
6:24:40 PM #39 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06f4bac0: Len x48
6:24:40 PM #40 CDR -500 File WriterStatus.cpp, Line 375
SCSI command aborted
D: HL-DT-ST DVDRAM GSA-H62L
6:24:40 PM #41 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation
6:24:40 PM #42 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(22) NeroError(-500)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06e01e40: Len x48
6:24:40 PM #43 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
6:24:40 PM #44 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 48x (7,200 KB/s)
6:24:40 PM #45 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #46 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:24:40 PM #47 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #48 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #49 SPTI -500 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x00) WinError(5) NeroError(-500)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
6:24:40 PM #50 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
6:24:40 PM #51 Text 0 File SCSIPTICommands.cpp, Line 460
UnLockMCN - completed with error 5 for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
