Since 2 months now i've getting a BSOD very often. Most of the time i get the errors IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA.
From cpc2004's other posts i understand this because of faulty hardware or a faulty device driver.
I uploaded 3 of the dumps to this location Minidumps (http://f50.nl/minidumps).
Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie.
Error 1001
De computer is opnieuw gestart na een foutencontrole. Foutencontrole: 0x10000050 (0xfffffff4, 0x00000000, 0x8057ec15, 0x00000000). Er is een dump opgeslagen in: C:\WINDOWS\Minidump\Mini091105-01.dmp.
Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie.
Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie.
Error 1001
De computer is opnieuw gestart na een foutencontrole. Foutencontrole: 0x1000008e (0x80000003, 0x805103f4, 0xf418a6b0, 0x00000000). Er is een dump opgeslagen in: C:\WINDOWS\Minidump\Mini090905-01.dmp.
Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie.
Can someone please look at this and tell me if it is a faulty memory stick or something else?
Greets,
Jimmy
Wisperbird
09-14-2005, 04:15 AM
Did you post your question on www.Helpmij.nl.
If not do so, than I can reply in dutch.
Wisperbird.
Ad
09-14-2005, 04:15 AM
hondablaster
09-14-2005, 05:05 AM
do a memtest
www.memtest.org
its free
my advice do a couple of passes
it there is errors. remove all sticks and then do one stick at a time to limit it down to which stick is junk. If you dont get errors report back and ill tell you how to PRIME95
Good luck
cpc2004
09-17-2005, 03:26 AM
Hi Jimmy,
I've investigated your minidumps. One of the minidumps crashes with memory corruption which is caused faulty ram.
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0d34d300, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: 804f0009, address which referenced memory